This complete Double Din Radio Replacement Kit, allows the fitment of a Double DIN aftermarket headunit to the selected vehicle. The kit includes everything you need to complete the installation including fascia, steering stalk controls, and aerial connections.

Radio panel 2-DIN with compartment with radio connection kit steering wheel remote control Citroen / Fiat / Opel / Peugeot

Fitting Kit Includes:

• Double Din Fascia (Piano black)
• Steering Wheel Control Interface
• Antenna Adaptors
• Stereo Patch Lead (Free CTMULTILEAD.2 Included)

Many car manufacturers install their own vehicle-specific radios that are visually adapted to the center console. Installation kits contain all components for replacing an OEM device. Depending on the vehicle's equipment, all adapters and interfaces required to operate the retrofit device and to restore vehicle functions are included in the scope of delivery.

Please note the installation recommendations for the individual components. In some cases, not all vehicle functions are supported. For example, Trailer Assist, E Call or other driver assistance systems. Before installation, check the OEM device and the vehicle menu for various settings. Depending on the vehicle equipment and the range of functions and software of the When retrofitting a device, individual operating functions may be omitted or replaced by other functions. Compare the adapter plugs shown with those in your vehicle and make sure that they fit visually and technically.

Please also check whether one of the specified original factory radios was installed in your vehicle. Before final assembly, check vehicle functions, vehicle settings and steering wheel remote control for functionality.

CTMULTILEAD.2 Universal Patch Lead

Patch Lead connects a compatible car stereo with a joystick input (blue line-in mini-jack) or wire input on the back of the unit to the existing stalk/steering wheel controls of the vehicle.

Compatible aftermarket headunits:

• Alpine (3.5mm jack)
• Beat (single wire connection)
• Chinese / Xtrons / 3 wire unbranded units (3 wire connection)
• Clarion (3.5mm jack)
• JVC (3.5mm or single wire)
• Kenwood (single wire)
• LG (3.5mm jack)
• Nakamichi (single wire connection)
• Panasonic  (single wire but NOT AV units)
• Philips (single wire connection)
• Pioneer (3.5mm jack)
• Sony (3.5mm jack)
• Zenec  (single wire)
• EONON
• JOYING
• XTRONS
• PUMPKIN
• Other Chinese SWC learning head units

Important Patch lead: 

• You can simply cut the loops / wires to select which brand you are fitting.
• Supplied with instruction sheet
• China Branded Headunit, please make sure your unit has 3 wires for connecting the patch lead to the car stereo that you are installing.

Important Fascia: 

• The fascias are made to suit industry standard sized stereos such as Alpine, JVC, Kenwood, Pioneer, Sony etc, NOT INCLUDING China units or unbranded units. 
• China units have a reputation to be over sized and may require modification to the fascia to allow it to fit.
• We do not take any responsibility for China units not fitting as they are not industry standard size.

Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare cases "modification"  may be  necessary or needed.
Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the shape & connection in the picture listed is the same as you have in your vehicle. If in doubt please Contact US with your vehicle details and we will confirm what you require.