Product Compatibility Chart
|Vauxhall||Corsa||2006 - 2014||D|
The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
This cable adapts from the original connector in the car, known as a quadlock, to standard aftermarket connectors for the new stereo, known as ISO connectors. The CANbus steering wheel control interface will retain the use of the original radio controls on the steering wheel with an aftermarket stereo. The CANbus interface generates a key present ignition supply to the new stereo, this means the stereo will turn on with the first click of the key and stay on until the key is removed from the ignition barrel. The interface also generates speed pulse, reverse gear and handbrake output signals, these are used when installing multimedia, navigation units and reverse cameras. This interface is built into the Quadlock to ISO harness adapter so installation is plug and play.
The CANbus interface requires a data wire to be connected at the rear of the display screen at the top of the dashboard (instructions are included), because our interface connects to the data signal here, rather than at the rear of the radio, it means that it never loses the data connection to the car. Other interfaces, when connected at the rear of the radio, will lose the data connection, this is because the car recognises that the original radio is no longer present and shuts down the data signal. This data signal does not shut down at the display screen.
- 49-CORSA-D Steering Control Adaptor
- Stereo Patch Lead
Works with the following brands
FOR CHINA UNITS YOU WILL NEED 49-000
|Radio Being Fitted||Part Number||Short Description|
|Chinese/ Unbranded||49-000||Patch lead for 49- Series Steering wheel control for Resistive Programming, Chinese, Xtrons, Pumpkin, Joying or unbranded stereo.|
|Alpine||49-001||Patch lead for 49- series steering wheel control for Alpine stereo.|
|Clarion||49-003||Patch lead for 49- series steering wheel control for Clarion stereo.|
|JVC||49-004SW||Patch lead for 49- series steering wheel control for JVC stereo.|
|Kenwood||49-005||Patch lead for 49- series steering wheel control for Kenwood stereo.|
|Pioneer||49-007||Patch lead for 49- series steering wheel control for Pioneer stereo.|
|Sony||49-008||Patch lead for 49- series steering wheel control for Sony stereo.|
|Zenec||49-011||Patch lead for 49- series steering wheel control for Zenec stereo.|
|Universal||49-025||Self pinning (instructions included) patch lead for 49- series steering wheel control for Alpine, Clarion, JVC, Kenwood, Pioneer or Sony stereo.|
PATCH LEAD INCLUDED FOR MOST BRANDED RADIOS
CHINA UNBRANDED RADIO MAY REQUIRE ADDITIONAL PATCH LEAD AT ADDITIONAL COST
- CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS.
- SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.
- China Branded Headunit, please make sure your unit has 3 wires for connecting the patch lead to the car stereo that you are installing.
- Please make sure that is the correct Steering Control Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture is the same as you have in your vehicle. If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.
We try to provide upto date information. If you are unsure about the model number please feel free to contact our customer service and we will be happy to help you selecting correct stalk adaptor for your car.