39-PGA-PDC Peugeot Steering Wheel Control And Parking Sensor Retention Interface
- Stock Status: In Stock
- Item Condition : New
- Available QTY : 5
- Brand: InCarTec
- Model: 39-PGA-PDC
- EAN: 7427282747806
- Warranty: 2 Years Warranty
Description
Product Compatibility Chart
| Make | Model | Years | Notes |
| Peugeot | 207 | 2006 - 2014 | |
| Peugeot | 207 | 2007 - 2014 | CC |
| Peugeot | 307 | 2001 - 2008 | |
| Peugeot | 308 | 2008 - 2013 | (1st GEN) T7 |
| Peugeot | 407 | 2004 - 2011 | |
| Peugeot | 607 | 2000 - 2009 | |
| Peugeot | 807 | 2002 - 2011 | |
| Peugeot | Expert | 2007 - 2016 | Mk II |
| Peugeot | Expert | 2016 onward | Mk III (Traveller) |
| Peugeot | Partner | 2002 - 2013 | 1 |
| Peugeot | Partner | 2008 - 2018 | II |
| Peugeot | RCZ | 2010 - 2015 | Coupe |
The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
CAN BUS steering wheel control and parking sensor retention interface for Citroen, Fiat and Peugeot cars with quadlock connectors behind the radio.
This interface uses quadlock connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus outputs as well as Ignition, speed pulse and reverse gear signals to the new stereo.
It has an additional BUZZER to retain the original front and rear parking sensor tones that are lost when replacing the original radio.
This interface will also allow you to access the Settings menu on the cars screen menu to change time and date.
What's Included
- 39-PGA-PDC Steering Control Adaptor
- Stereo Patch Lead
Works with the following brands
- Alpine
- Clarion
- JVC
- Kenwood
- Pioneer
- Sony
Patch lead INCLUDED for the steering controls depending on the make of radio being fitted.
| Radio Being Fitted | Part Number | Short Description |
| Universal | 39-HU-UNI | Self-pinning Patch lead for 39-Series Steering wheel control for Alpine, kenwood, JVC, Blaupunkt (Mini ISO), Clarion, Zenec, Resistive Programming (Chinese/ Unbranded), Sony and Pioneer stereos |
TECHNICAL NOTE:
- CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS.
- SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.
IMPORTANT NOTE
- China Branded Headunit, please make sure your unit has 3 wires for connecting the patch lead to the car stereo that you are installing.
- Please make sure that is the correct Steering Control Adptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture is the same as you have in your vehicle. If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.
We try to provide upto date information. If you are unsure about the model number please feel free to contact our customer service and we will be happy to help you selecting correct stalk adaptor for your car.
