23-226-AMP Kia Sportage, Optima with OEM Amplifier Steering Wheel Control Interface
- Stock Status: In Stock
- Item Condition : New
- Available QTY : 5
- Brand: InCarTec
- Model: 23-226-AMP
- EAN: 7427282712392
- Warranty: 2 Years Warranty
Description
Product Compatibility Chart
| Make | Model | Years | Notes |
| Kia | Optima | 2010 - 2015 | 3rd Gen (TF) |
| Kia | Sportage | 2010 - 2015 | 3rd Gen (SL) |
The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Interface to connect to the amplifier of a 2010 - 2015 Kia Sportage as well as interfacing with the steering wheel controls.
This interface also includes a reverse signal, speed pulse and parking brake outputs, along with retention for the OEM reverse camera and aux port.
MUST BE USED WITH PART 23-235
Suitable for Kia Sportage (SL) 2010 - 2015 with original OEM amplifier, including models with Infinity Sound Amplifier.
- Retains steering wheel controls
- Reverse Output, Speed Pulse and Parking Brake Outputs
- Retains factory amplifier
- Retains original aux port
- Retains factory reverse camera
- Comes with patch lead included
MUST BE USED WITH PART 23-235 (Hyundia/Kia Amplifier Retention Interface)
Not suitable for vehicles without an OEM amplifier. Amplified vehicles can be identified by the sound system branding on the radio or the subwoofer in the right hand side of the boot:
Fitting instructions can be found HERE
What's Included
- 23-226-AMP Steering Control Adaptor
- Stereo Patch Lead
Works with the following brands
- Alpine
- Clarion
- JVC
- Kenwood
- Pioneer
- Sony
- China Units
TECHNICAL NOTE:
- CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS.
- SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.
IMPORTANT NOTE
- China Branded Headunit, please make sure your unit has 3 wires for connecting the patch lead to the car stereo that you are installing.
- Please make sure that is the correct Steering Control Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the connection in the picture is the same as you have in your vehicle. If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.
We try to provide upto date information. If you are unsure about the model number please feel free to contact our customer service and we will be happy to help you selecting correct stalk adaptor for your car.
