21-120 Audi ISO to Male Din Aerial Antenna Adaptor Cable (With 12v power feed)
- Stock Status: In Stock
- Item Condition : New
- Available QTY : 10
- Brand: InCarTec
- Model: 21-120
- EAN: 7427282744461
- Warranty: 2 Years Warranty
Description
Product Compatibility Chart
| Make | Model | Years | Notes |
| Audi | A2 | 1999 - 2005 | (8Z) |
| Audi | A3 | 1996 - 1999 | (8L) |
| Audi | A3 | 2000 - 2003 | (8L) facelift |
| Audi | A3 | 2003 - 2007 | (8P) |
| Audi | A4 | 1995 - 2001 | (B5) |
| Audi | A4 | 2001 - 2005 | (B6) |
| Audi | A4 | 2001 - 2009 | Cabriolet |
| Audi | A6 | 1994 - 1997 | 1st Gen (C4/4A) |
| Audi | A6 | 1997 - 2004 | 2nd Gen (C5/4B) |
| Audi | TT | 1998 - 2006 | MK1 (8N) |
The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Antenna adapter cable for cars with ISO connectors that have amplified original antennas.
This cable converts the cars existing ISO aerial plug to an aftermarket DIN type used by most car radio manufacturers.
It also provides a power feed to give 12v from the car radio to the cars amplified antenna.
For Alpine Radios use item 21-101 to convert the DIN end to ISO or use item 21-080
Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare cases "modification" may be necessary or needed.
Please make sure that is the correct Antenna Adapter for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the connection in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.
