Audi All Models

Speaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Seco..

Car Audio Stereo Installation kit for installing a new after market headunit into your Audi. This is complete kit including Fascia Trim Panel, Wiring Harness, Aerial Adaptor and keys to remove your old stereo.Package IncludesSingle Din Fascia Adaptor (Matt Black) Wiring Harness (IS..

Complete stereo upgrade fitting kit to install a Single/Double DIN aftermarket radio in Audi A3 (8P) facelift (2006-2013) car models with CANBus ignition and rear amplified sound systems.{ vehicle_compatibility }Package IncludesFascia Adaptor Panel CAN Ignition Interface Quadlock ..

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

Connects2 SWC.2 Steering Wheel Control Interface Adaptor . Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steerin..

A pair of front door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical InformationLoudspeaker: 165 mm Installation cutout: 143.5 mm Ring outside : 209.50 x 185.00 m..

Complete Double Din Radio Replacement Kit by Connects2 CTKAU11, allows the fitment of a Double Din aftermarket headunit to the selected vehicle. The kit includes everything you need to complete the installation including fascia, Infodapter Interface, Antenna Adaptor and patch lead.{ vehicle_comp..

Speaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Seco..

European Radio Key for early Audi radiosSTEREO REMOVAL KEYSStereo Removal Keys to remove head unit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent stereo theft. This means that to remove one of these uni..

Package IncludesKenwood KFC-S1766 Stage Sound Series 17cm 6.5" 2-Way Coaxial Car Speaker 300 Watts 165mm Speaker AdaptorKey FeaturesStage Sound Series Flush Mount Speaker 2-Way 2-Speaker System 17 cm Polypropylene Woofer Cone Heavy-Duty Woofer Magnet Circuit 25mm..

Car Audio Stereo Installation kit for installing a new after market headunit into your Audi. This is complete kit including Fascia Trim Panel, Wiring Harness, Aerial Adaptor and keys to remove your old stereo.Package IncludesSingle Din Fascia Adaptor (Black) Wiring Harness (ISO Rad..

Complete stereo upgrade fitting kit to install a single or double DIN aftermarket radio and retain the use of the steering wheel controls in an Audi TT 8J with fully amplified speakers.{ vehicle_compatibility }Package IncludesFascia Adaptor Panel With Pocket (Matt Black) Steering wh..

Connects2 INFODAPTER allows vehicle information such as Climate Control, Parking Sensors and Heated seats to be displayed on any aftermarket AV head unit. This information would usually be displayed on the original head unit and therefore would not be retained without the use of an INFODAPTER. The i..

CT27AA08 ISO to Din converts car specific antenna connector to a universal aftermarket connector. Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit and your vehicle has a ISO type aerial lead fitted. Aerial AdaptorAn Aerial ..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Car Audio Stereo Installation kit for installing a new after market double din headunit into your Audi. This is complete kit including Fascia Trim Panel, Steering Control Interface for Volume Controls on Steering Wheel, Aerial Adaptor and keys to remove your old stereo. { vehicle_compatibil..

Double Fakra to DIN antenna adapter cable with 12v phantom power from a male bullet connection.This antenna adapter cable adapts from the original Double Fakra connector in the vehicle to a standard aftermarket radio DIN antenna connection for the fitting of a stereo upgrade.This cable conve..

ISO adapter harness for fitting a new stereo in an Audi A4, A4 Cabriolet or A6 with an original RND-D (Navigation Plus) radio the basic rear amplified audio system.Also suitable for Audi TT built before November 2001.This harness adapts from the original ISO and Mini ISO connectors at the ba..

Package IncludesPioneer SPH-DA77DAB 6.8" WVGA Capacitive Multi-touch Panel Screen Weblink 3.0 Android Auto/ Apple CarPlay DAB Car Stereo DAB Aerial Double Din Fascia Kit CAN-Bus Steering wheel Control Adaptor (ISO and Quadlock looms) Aerial Adaptor Audi release keys Stereo Pa..

Package IncludesJVC KW-M785DBW 6.8" Screen USB Bluetooth Wireless Apple CarPlay Android Auto DAB Aerial Double Din Fascia Kit (Black) CAN-Bus Steering wheel Control adapter (ISO and Quadlock looms) Aerial Adaptor Audi release keys Stereo Patch Lead{ vehicle_compatibilit..