Audi A3

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

Speaker adapter cables;  used to connect after market speakers to the original loom on multiple Audi and Seat modelsFits most Audis built after 2002, the Seat Exeo (2008-2013) and the Seat Leon Mk3 (2013-2019)May not fit all versions of every vehicle. Some amplified and named sound syst..

Package Includes:PIONEER TS-G1720F - 6.3/4 inch 17cm 2-Way Coaxial Speaker (Sold As Pair) Speaker AdaptorPioneer G-series 17cm 6.3/4 inch 2-Way 300W Coaxial Car SpeakersFor better-sounding drives. Discover the renewed G-seriesThe improved G-series speaker range is specificall..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

Audi Horizontal Slot Radio Removal Keys.Suitable for the removal of all stereos in AUDI CARS - A2, A3, A4, A6, A8 & TTSTEREO REMOVAL KEYSStereo Removal Keys to remove head unit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head u..

Package Includes:Kenwood KFC-S1766 Stage Sound Series 17cm 6.5" 2-Way Coaxial Car Speaker 300 Watts (Sold As Pair) Speaker AdaptorKenwood KFC-S1766 Stage Sound Series 17cm 6.5" 2-Way Coaxial Car Speaker 300 WattsKey FeaturesStage Sound Series Flush Mount Speaker..

Connects2 VAG Double Fakra to DIN Antenna Adaptor. Twin FAKRA to DIN Antenna Adaptor With Phantom Power Supply. For Aftermarket Radio With DIN Antenna Connector. Converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when r..

Double Din Car Audio Stereo Installation kit for installing a new after market stereo into your Audi A3, S3. This is complete kit including Fascia Trim Panel, steering Wheel Control Interface, Aerial Adaptor and keys to remove your old stereo. { vehicle_compatibility }Package Includes: ..

Radio Removal Keys for Audi  Vertical ExtractionSTEREO REMOVAL KEYSStereo Removal Keys to remove head unit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent stereo theft. This means that to remove one..

Complete stereo upgrade kit to install an aftermarket Single DIN head unit into a Audi A3 (8L) (1996-1999) car.Package IncludesSingle Din Fascia Adaptor Audi ISO and Mini ISO Adaptor Harness For Rear Amplified Cars ISO to DIN Antenna Adaptor Lead With 12v Power Feed Audi Radio Relea..

This adapter allows an aftermarket head unit to be installed, whilst retaining the factory fitted amplified system.When connected your new stereo may not power up, and this is no fault of the wiring harness purchased. Audi / VW / Skoda / Fiat and other vehicles tend not to have an ignition sw..

The ISO-T Harness SOT lead (SOUND ON TOP) is the perfect accessory when installing an aftermarket amplifier. The ISO-T Harness installed between the amplifier and vehicle, taking high-level input signal from the car and passing it through the amplifier and sending it to the speakers. The SOT leads a..

Complete stereo upgrade fitting kit to install a Single or Double DIN head unit and retain the original steering wheel controls in Audi A3 8P facelift (2006-2013) cars with fully amplified sound systems.{ vehicle_compatibility }Package IncludesFascia Adaptor Panel Steering Wheel Con..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Radio Removal Keys for Audi  Vertical ExtractionSTEREO REMOVAL KEYSStereo Removal Keys to remove head unit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent stereo theft. This means that to remove one..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Single din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fascia..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Single din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Car Audio Fitt..

Package Includes:JBL Stage1 62 (6.5") 2-Way Coaxial Car Speakers 400 Watt 165mm Speaker Adaptor{ vehicle_compatibility }Stage1 62Take your audio experience to the next level with the JBL Stage1 62 coaxial car speakers. These car speakers deliver powerful performance with ..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.This Fitting Kit Incl..