Audi A8

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

Audi Horizontal Slot Radio Removal Keys.Suitable for the removal of all stereos in AUDI CARS - A2, A3, A4, A6, A8 & TTSTEREO REMOVAL KEYSStereo Removal Keys to remove head unit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head u..

Speaker adapter cables;  used to connect after market speakers to the original loom on multiple Audi and Tesla models.Suitable for replacing Audi Tweeters or Tesla mid-range speakers.May not fit all speakers on all versions of every vehicle. Some vehicles have mi-range speakers or tweet..

ISO adapter harness for Audi cars with ISO and mini ISO connectors at the rear of the head unit.The harness has a built in adapter to drop the rear speaker outputs from the new head unit to a low line level signal to work with the original amplifier in the car.Some cars may have an ignition ..

CT27AA08 ISO to Din converts car specific antenna connector to a universal aftermarket connector. Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit and your vehicle has a ISO type aerial lead fitted. Aerial AdaptorAn Aerial ..

Connects2 VAG Double Fakra to DIN Antenna Adaptor. Twin FAKRA to DIN Antenna Adaptor With Phantom Power Supply. For Aftermarket Radio With DIN Antenna Connector. Converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when r..

This adapter allows an aftermarket head unit to be installed, whilst retaining the factory fitted amplified system.When connected your new stereo may not power up, and this is no fault of the wiring harness purchased. Audi / VW / Skoda / Fiat and other vehicles tend not to have an ignition sw..

Twin Fakra to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and ..

OEM Units With Horizontal Release KeysSTEREO REMOVAL KEYSStereo Removal Keys to remove head unit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent stereo theft. This means that to remove one of these units..

Twin Fakra - DIN Antenna Adaptor KitAerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN versions. Antenna Aerial Adaptor, converts car specific antenna connector ..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

ISO adapter harness for fitting a new stereo in an Audi A4, A4 Cabriolet, A6 or A8 with an original RND-D (Navigation Plus) radio with BOSE amplified audio system.Also suitable for Audi TT built before November 2001 with BOSE amplified audio system.This harness adapts from the original ISO a..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Radio Removal Keys for Audi  Vertical ExtractionSTEREO REMOVAL KEYSStereo Removal Keys to remove head unit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent stereo theft. This means that to remove one..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

A pair of ISO standard speaker adapter cables for various Abarth, Alfa Romeo, Audi, Citroen, Chrysler, Fiat, Holden, Iveco, Jaguar, Lancia, Peugeot, Porsche, Seat, Skoda, Renault, Vauxhall, Volkswagen And Volvo car vehicle models.Use to fit new aftermarket speakers without needing to cut off the..

Twin Fakra to ISO Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and ..

Fakra to Din Antenna Adaptor with Phantom Power Supply. This adapter converts car specific antenna connecter to a DIN aftermarket connector. Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are..