Audi

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

Package IncludesJVC KW-X850BT Double Din Mechless USB, Bluetooth, AUX, iPod/iPhone Car Stereo Fascia Adaptor Panel With Pocket (Matt Black) Steering wheel control interface Quadlock to Phono Adaptor Lead Antenna Adaptor Cable Double Din Fitting Cage Stereo Patch Lead{ vehicl..

Car Audio Stereo Installation kit for installing a new after market double din headunit into your Audi. This is complete kit including Fascia Trim Panel, Steering Control Interface for Volume Controls on Steering Wheel, Aerial Adaptor and keys to remove your old stereo. { vehicle_compatibil..

Seal adapter to fit DAB Shark Fin antenna to VW and Audi carsRubber adapter seal to fit the 70-917 DAB shark fin antenna to Audi and Volkswagen cars.Fits Audi A6 and VW Golf VII..

Radio Release keys For the removal of the original head unit in Audi vehiclesSTEREO REMOVAL KEYSStereo Removal Keys to remove head unit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent stereo theft. This ..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Single / double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Replacement ..

A pair of front door car speaker adapter panels for 200mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataLoudspeaker: 200 mm Installation cutout: 182 mm Height: 44 mmPlease make sure tha..

ISO T harness for new Volkswagen Golf Mk7, Transporter T6, Audi A1 with full pass though of all cables on newer style Quadlock connector. Flying ignition for connection to 12v Ignition if not using a CAN ignition device.This cable fits behind the radio and routes the phone audio through..

OEM Units With Horizontal Release KeysSTEREO REMOVAL KEYSStereo Removal Keys to remove head unit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent stereo theft. This means that to remove one of these units..

Car Audio Stereo Installation kit for installing a new after market headunit into your Audi. This is complete kit including Fascia Trim Panel, Steering Control Interface, ISO to Male Din Aerial Adaptor and keys to remove your old stereo. Package IncludesSingle Din Fascia Panel (Matt ..

Package IncludesPioneer 16.5cm 3-Way Coaxial 320W Car Speakers (Sold as Pair) 165mm Speaker Adaptor Rings Speaker Adaptor PlugsIt Just Got Easier to Upgrade your Genuine OEM Sound.Upgrade the original sound system of your car. Our A series line up can give you the easy to instal..

Complete stereo upgrade fitting kit to install a Single or Double DIN head unit and retain the original steering wheel controls in Audi A3 8P facelift (2006-2013) cars.{ vehicle_compatibility }Package IncludesFascia adapter panel (MATT BLACK) Steering Wheel Control Interface Quadl..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Replacement car audio..

Replacement car audio fascia to enable you to change the original radio in the car to a Single aftermarket version.This fascia has a fixed pocket Fits Audi A1 (2010-2018) car models (WITHOUT FACTORY FITTED MMI SYSTEMS)COLOUR: MATT BLACKPLEASE NOTE: Only suitable for car models with ori..

Replacement car audio fascia to enable you to change the original radio in the car to a Single or Double DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted ..

A pair of front door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical InformationLoudspeaker: 165 mm Installation cutout: 143.5 mm Ring outside : 209.50 x 185.00 m..

Factory fitted speakers often have a shape that does not conform to the DIN standard. Our Speaker adapter panels are designed to line up with the original mounting holes fit behind the door cards of various VW group vehicles to allow you to change to new improved quality 165mm aftermarket speakers q..

A pair of front door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataLoudspeaker: 165 mm Installation cutout: 147.5 mm Ring outside: 170 mm / 229.5 mm Ring ..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..