Audi A1

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

Speaker adapter cables;  used to connect after market speakers to the original loom on multiple Audi and Seat modelsFits most Audis built after 2002, the Seat Exeo (2008-2013) and the Seat Leon Mk3 (2013-2019)May not fit all versions of every vehicle. Some amplified and named sound syst..

Speaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Seco..

Connects2 VAG Double Fakra to DIN Antenna Adaptor. Twin FAKRA to DIN Antenna Adaptor With Phantom Power Supply. For Aftermarket Radio With DIN Antenna Connector. Converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when r..

Twin Fakra - DIN Antenna Adaptor KitAerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN versions. Antenna Aerial Adaptor, converts car specific antenna connector ..

Replacement car audio fascia to enable you to change the original radio in the car to a Single aftermarket version.This fascia has a fixed pocket Fits Audi A1 (2010-2018) car models (WITHOUT FACTORY FITTED MMI SYSTEMS)COLOUR: MATT BLACKPLEASE NOTE: Only suitable for car models with ori..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

The ISO-T Harness SOT lead (SOUND ON TOP) is the perfect accessory when installing an aftermarket amplifier. The ISO-T Harness installed between the amplifier and vehicle, taking high-level input signal from the car and passing it through the amplifier and sending it to the speakers. The SOT leads a..

Designed to fit any 200mm speaker, this pair of adjustable speaker baffles creates a flexible seal around the back of the speakers, protecting them from water that gets inside doors and interior panels. Additionally it provides a barrier, stopping interference between sound from the front and rear o..

Speaker adapter cables;  used to connect after market speakers to the original loom on multiple Audi and Tesla models.Suitable for replacing Audi Tweeters or Tesla mid-range speakers.May not fit all speakers on all versions of every vehicle. Some vehicles have mi-range speakers or tweet..

Adaptor cable to convert Audi A1 with quadlock connectors to a standard ISO connector for fitting an aftermarket head unit. The harness has a built in CANbus interface that provides a key present ignition power supply to the radio, ISO adapter harness for Audi A1 vehicles with the new styl..

Radio Removal Keys for Audi  Vertical ExtractionSTEREO REMOVAL KEYSStereo Removal Keys to remove head unit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent stereo theft. This means that to remove one..

Package IncludesPioneer Class D 4 Channel Multi Channel Car Amplifier 400W InCarTec ISO T harness SOT Lead{ vehicle_compatibility }Compact 4 Channel Power.An amplifier shouldn’t take up too much space, especially in your car. That is why this Class-D amp might just be wh..

Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steering wheel co..

A pair of front door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical InformationLoudspeaker: 165 mm Installation cutout: 143.5 mm Ring outside : 209.50 x 185.00 m..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Single din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Car Audio Fitt..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

ISO T harness for new Volkswagen Golf Mk7, Transporter T6, Audi A1 with full pass though of all cables on newer style Quadlock connector. Flying ignition for connection to 12v Ignition if not using a CAN ignition device.This cable fits behind the radio and routes the phone audio through..

Twin Fakra to DIN & ISO adapters have both Male DIN and ISO connections eliminating the need to stock both DIN and ISO products, this is a must for every installer. Converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed..