Audi A6

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

ISO adapter harness for fitting a new stereo in an Audi A4, A4 Cabriolet, A6 or A8 with an original RND-D (Navigation Plus) radio with BOSE amplified audio system.Also suitable for Audi TT built before November 2001 with BOSE amplified audio system.This harness adapts from the original ISO a..

CT27AA08 ISO to Din converts car specific antenna connector to a universal aftermarket connector. Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit and your vehicle has a ISO type aerial lead fitted. Aerial AdaptorAn Aerial ..

Radio Removal Keys for Audi  Vertical ExtractionSTEREO REMOVAL KEYSStereo Removal Keys to remove head unit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent stereo theft. This means that to remove one..

Fakra to Din Antenna Aerial Adaptor, Suitable for Aftermarket Radio With DIN Antenna Connector. Converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head..

This adapter allows an aftermarket head unit to be installed, whilst retaining the factory fitted amplified system.When connected your new stereo may not power up, and this is no fault of the wiring harness purchased. Audi / VW / Skoda / Fiat and other vehicles tend not to have an ignition sw..

Phoenix Gold ZDT-VAG1 T-Harness AdaptorUpgrade your vehicle’s audio with our T-Harness . Our plug-and-play solution makes it easy to upgrade your audio by integrating seamlessly with our amplifiers. Built for a hassle-free installation, with everything you need included, no cutting or..

This is a plug and play adapter cable for Audi cars with ISO and Mini ISO connectors at the back of the original radio and with rear  amplified audio systems.This cable has an adjustable  line-out converter built into the speaker cables, this drops the output levels from high level to ..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Car audio metal cage kit and trim 113mm high. Needed for aftermarket head-units that do not come with cage kits.This kit is designed  as a replacement to the metal cage kit that is usually supplied with your new aftermarket double din head-unit or navigation system.It is used in standar..

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

ISO adapter harness for Audi cars with ISO and mini ISO connectors at the rear of the head unit.The harness has a built in adapter to drop the rear speaker outputs from the new head unit to a low line level signal to work with the original amplifier in the car.Some cars may have an ignition ..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Package IncludedPhoenix Gold ZDSKAS1 6.5″ (165mm) 2-Way Car Front Door Midbass Speakers Stinger RKXSK Expert Sound Proofing Deadening Material 2 Sheet Speaker KitZDSKAS1 Speaker KitThe ZDSKAS1 speaker kit is specifically designed to fit directly into the same location a..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Audi Horizontal Slot Radio Removal Keys.Suitable for the removal of all stereos in AUDI CARS - A2, A3, A4, A6, A8 & TTSTEREO REMOVAL KEYSStereo Removal Keys to remove head unit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head u..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..