Vauxhall Steering Wheel control adaptor enables you to retain use of your steering wheel controls with aftermarket car stereo i.e. Alpine, Bear, JVC, Kenwood, Sony, Pioneer, Zenec etc.
Brand: InCarTec
Model: 49-PGA-01
This CANBUS interface will allow you to retain the audio steering wheel controls when installing an after market head unit.This interface will also allow the steering wheel controls to access the display screen menu.The CANBUS interface will also give out CAN ignition, speed pulse, reverse g..
£69.99
Ex Tax:£69.99
Brand: InCarTec
Model: 29-669
Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.This interface will retain the use of the standard steering wheel audio controls (volume, seek, source and mute) with an aftermarket head unit.This interface provides control..
£49.99
Ex Tax:£49.99
Brand: InCarTec
Model: 29-716.V2
Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. Includes ISO power and speaker wiring to connect the car to the aftermarket head-unitThis interface will retain the use of the steering wheel audio controls with an aftermarket he..
£69.99
Ex Tax:£69.99
Brand: Connects2
Model: CTSVX002.2AA
Combined Steering Wheel Control Interface with built in Aerial Adaptor. One solution for simple integrationUpgrade to an aftermarket head unit whilst maintaining the use of your factory steering wheel controls. The NEW range of interfaces combined steering wheel control interfaces with built in ..
£64.99
Ex Tax:£64.99
Brand: InCarTec
Model: 39-PGA-PDC
CAN BUS steering wheel control and parking sensor retention interface for Vauxhall cars with quadlock connectors behind the radio.This interface uses quadlock connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. I..
£89.99
Ex Tax:£89.99
Brand: InCarTec
Model: 29-UC-050-REN3
Car Audio Steering wheel interface allowing use of the original audio buttons with a new after market head-unit. Suitable for Nissan NV400, Vauxhall Movano and Renault Megane, Twingo, Master and Clio with two white connectors behind the radio and a separate display.This interface includ..
£109.99
Ex Tax:£109.99
Brand: InCarTec
Model: 29-608-LOOM
Replacement steering control loom. Allows connection directly from the stalk paddle to a steering control interface, this bypasses original equipment such as display units, tuner modules and amplifiers that carry the stalk signal which is lost when removing the original head unit{ vehicle_compat..
£49.99
Ex Tax:£49.99
Brand: Connects2
Model: CTSVX001.2AA
Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..
£43.99
Ex Tax:£43.99
Brand: Connects2
Model: CTUVX01
Connects2 INFODAPTER allows vehicle information such as Climate Control, Parking Sensors and Heated seats to be displayed on any aftermarket AV head unit. This information would usually be displayed on the original head unit and therefore would not be retained without the use of an INFODAPTER. The i..
£199.99
Ex Tax:£199.99
Brand: Connects2
Model: CTUVX01
Connects2 INFODAPTER allows vehicle information such as Climate Control, Parking Sensors and Heated seats to be displayed on any aftermarket AV head unit. This information would usually be displayed on the original head unit and therefore would not be retained without the use of an INFODAPTER. The i..
£199.99
Ex Tax:£199.99









