Complete stereo upgrade fitting kit to install a Single or Double DIN aftermarket radio and retain the use of the steering wheel controls in Honda CR-V (2007-2011) car models (WITH ORIGINAL TYPE 2VNO NAVIGATION RADIO)
This fitting kit is designed for head-units with resistive programming steering controls ( KEY1, KEY2 or SWC1, SWC2) and 3.5mm jack.

Package Includes

• Single/ Double Din Fascia Adaptor
• Steering Control For Resistive Programmable Head Units
• Antenna Adaptor
• Stereo Patch Lead (Included)

This kit is only suitable for aftermarket head-units with resistive programming steering controls (KEY1, KEY2 or SWC1, SWC2) and 3.5mm jack.

Fascia Adaptor

This adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.

Replacement car audio facia to enable you to change the original radio in the car to a single and double DIN aftermarket version. This multi kit has side fixing brackets for a flush fit so no cage is needed if you are fitting a Double Din unit. A removable pocket is included for Single DIN installation.
Fits Honda CR-V 3rd Gen (2007-2011) car models

Steering Control Adaptor

A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. 

Honda CRV 2007> Car Audio Steering wheel ISO cables allowing use of the original buttons when fitting an aftermarket car radio stereo upgrade with resistive programming. Provides power and speaker connections from the car. 

This cable will retain the use of the steering wheel controls when fitting an aftermarket head-units with resistive programmed steering controls ( KEY1, KEY2 or SWC1, SWC2) and 3.5mm jack.

Aerial Adaptor

An Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit.

3.5mm Jack Self Learning Programable Patch Lead

Patch lead for use with 20-XXX-SWC ISO steering wheel control cables to convert from 2 wire learning to 3.5mm jack.
Use with resistive programming aftermarket units like Blaupunkt, Grundig or Road Angle. Also for some Kenwood, JVC and Sony units using their "CUSTOM" setting for steering control input by resistive programming.
This patch lead plugs into the 2 or 3 wire resistive learning fly leads of the 20-XXX-SWC cable converts into the 3.5mm socket to then be plugged into the back of any head-unit that has resistive programming steering control input.

This kit is only suitable for Chinese, Unbranded and some aftermarket head units with resistive learning, for Alpine and Pioneer, please use FK-330-NAV
This kit does not retain the original subwoofer on cars equipped with one. See 29-667-SUB for subwoofer retention.

Important Fascia Notes

• The fascias are made to suit industry standard sized stereos such as Pioneer, Kenwood, Sony, Alpine, JVC etc, NOT INCLUDING China units or unbranded units. 
• China units have a reputation to be over sized and may require modification to the fascia to allow it to fit.
• We do not take any responsibility for China units not fitting as they are not industry standard size.

Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.

Please make sure that is the correct Fitting Kit for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the connection & Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.