InCarTec 50-320 Land Rover Single/Double Din Car Stereo Fascia Panel
- Stock Status: In Stock
- Item Condition : New
- Available QTY : 5
- Brand: InCarTec
- Model: 50-320
- Other Part #: CT24LR02
- EAN: 7427282752107
- Warranty: 2 Years Warranty
Description
Product Compatibility Chart
| Make | Model | Years | Notes |
| Land Rover | Discovery | 2004 - 2009 | III (LR3) |
| Land Rover | Freelander | 2006 - 2014 | II (L359) |
| Land Rover | Range Rover Sport | 2005 - 2009 | (L320) |
The years stated refer to the model's years of manufacture, please check the item description for information about any changes there may be within these productions years.
Replacement car audio fascia to enable you to change the original radio in the car to a single and double DIN aftermarket version
Fits Land Rover - Discovery III (LR3) , Land Rover Freelander II (L359) , Land Rover Range Rover Sport (L320).
Some Range Rover Sport models will have a gap along the bottom edge of this fascia, about 10mm high. This gap can be filled out with a strip of plastic, from the driving position this gap cannot be seen.
COLOUR: MATT BLACK
If fitting a double din unit you will also require a 103mm deep cage (51-012) to replace the cage supplied with your aftermarket head-unit. For a double DIN fascia for these vehicles with the cage included, please see our 50-853 fascia.
Important Fascia Notes
- China units have a reputation to be over sized and may require modification to the fascia to allow it to fit.
- We do not take any responsibility for China units not fitting as they are not industry standard size.
- If the cage supplied with the stereo does not fit the fascia then you must purchase a universal cage which is slightly smaller.
- Click here for CT23UN01 UNIVERSAL Mounting Cage
Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary.
Please make sure that is the correct Fascia for your vehicle by firstly checking to see if your vehicle make, model and year is listed in the description. Secondly by checking to see if the Shape in the picture listed is the same as you have in your vehicle. If in doubt please email us with your vehicle details and we will confirm what you require.
