JL Audio C1-100CT 1-inch (25mm) Aluminum Dome Component Tweeters, Pair
- Stock Status: In Stock
- Item Condition : New
- Available QTY : 1
- Brand: JL Audio
- Model: C1-100CT
- EAN: 7427307002828
- Warranty: 1 Year Warranty
Description
C1-100CT Component Tweeters Pair
1.0-inch (25 mm) Aluminum Dome Tweeters
C1 component tweeters are engineered to deliver refined performance, with excellent off-axis response and high-frequency extension. Utilizing true, edge driven 1.0-inch aluminum domes with silk suspensions, the C1-100ct component tweeters provide smooth, detailed reproduction of treble frequencies from 3.6 – 22 kHz.
The tweeters can be flush-mounted or surface-mounted with the supplied fixtures to fit a wide variety of installation needs. Inline, outboard, 12 dB / octave, high-pass filters are included to ensure smooth response and reliability. These filters also are equipped with Advanced Tweeter Protection Circuitry to improve power handling and reliability.
When it comes to value, C1 is the real deal!
General Specifications
- Continuous Power Handling (RMS) 60 W
- Recommended Amplifier Power (RMS) 20 - 60 W / Ch.
- System Efficiency 91.5 dB @ 1 W / 1 m
- System Nominal Impedance 4 Ω
- System Frequency Response 3.6 kHz - 22 KHz ± 3 dB
- With supplied crossover
Tweeter Physical Specifications
- Flush Mount Fixture Diameter (A1) 1.97 in / 50 mm
- Surface Mount Fixture Diameter (A2) 2.01 in / 51 mm
- Flush Mount Mounting Hole Diameter (B) 1.75 in / 45 mm
- Flush Mount Mounting Depth (C) 0.40 in / 10 mm
- Flush Mount Tweeter Frontal Protrusion (D1) 0.32 in / 8 mm
- Surface Mount Tweeter Frontal Protrusion (D2) 0.87 in / 22 mm
Note:Illustration may not be to Scale
Crossover Physical Specifications
- Width (W) 1.96 in / 50 mm
- Depth (D) 1.34 in / 34 mm
- Height (H) 0.90 in / 23 mm
Sold as a pair. Surface-mount and flush-mount fixtures and grilles are included.
What's in the box:
- 2 Tweeters (with 6" wires attached)
- 2 Crossovers
- 2 Flush mount housings (tweeters installed)
- 2 Surface mount housings
- 2 Metal spring clips (for flush mounting)
- Four 5/8" Flat head screws
- Two 25mm Stud bolts
- Two 10mm Stud bolts
- 2 M5 Nuts
- Owner's manual