Add a Rear parking camera to the Original screen on select Volkswagen ID3 ID4 ID5 vehicle models with a 10 inch multimedia tablet MIB3 screen monitor.

The interface included in this kit allows you to add a rear camera to the OEM monitor of select VW cars with MIB3. It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.

This integration kit also comes complete with a UK & European car number plate/ registration plate frame with built in rear view camera, providing additional visual safety to the back of the vehicle, whilst maintaining its original appearance.

On most cars you will need to drill a hole to pass the cable into the vehicle

Volkswagen ID.3 ID.4 ID.5 Camera Interface

This interface allows you to add rear camera to the OEM monitor of select VW cars with MIB3. It adds active parking lines and integrates with the cars parking sensors to provide a visual parking display.

Connects at the head-unit control module beneath glove box. No special coding is needed as the interface integrates with the LVDS cable behind the vehicle head unit. The rear camera will activate as soon as reverse gear is engaged. 

The second Video input is used for DVR input if required. If a front camera input is needed it is possible to use this extra video input however the video feed wire (red) will need to be moved to the position next to the black wire on the white connector. (dip switch 8 is then set to ON).

The front camera will only activate if reverse gear is selected and then immediately afterwards drive forward gear is selected. it 

UK & European Car Number Plate/ Registration Plate Frame With Built In Rear View Camera

This camera is also equipped with optional dynamic parking guidelines which can be enabled or disabled.

Product Features

• Sensor: 1/3 PC1058 CMOS
• Resolution: 960 x 576
• TV line: 480TVL
• View angle: 115° Horizontal, Vertical 80° , Lens up and down adjustable
• Connector: 4PIN BMW connector / RCA connector
• Min illumination: 0Lux, IR LED night vision
• Waterproof: IP68
• Power voltage: 6V-18V
• Power Consumption max: 100mA
• Operation Temp: -20?~+70?
• White Balance: AUTO
• Day/Night: AUTO