InCarTec

A pair of 87mm (3.5 inch) 4ohm, 80W 2-Way Coaxial speakers{ vehicle_compatibility }SpecificationsDimension: 87mm Material: Polycarbonate cone - Steel basket Suspension: Butyl rubber Max Power: 80 Watt Frequency Response: 100-20 KHz Efficiency: 87 dB (1W / 1mt) * Impedance:..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. 172m..

MDF panels for BMW E39 5 series cars to fit 165mm speakers to the front doors.  These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your..

A pair of front or rear door car speaker adapter panels for 165mm speakers. MDF panels for Kia Soul and Magentis cars to fit 165mm speakers to the front and rear doors. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical Dat..

Toyota pocket to use with original radio brackets. Enables you to replace the original radio with a single DIN aftermarket version.Remove the original brackets from the cars OEM radio, Fix these brackets on to the new car radio and the pocket.Fits various Toyota car modelsCOLOUR: MATT BL..

Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in Volkswagen Touareg I (2003-2009) vehicles.Package IncludesDouble Din Fascia Adaptor 103MM Double Din Fitting Cage Steering Control Interface Fakra to Di..

Universal pocket to enable you to fit a single DIN radio into a Double DIN kits This can be used with faceplate 50-056COLOUR: BLACKCar Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "..

Add Camera To OEM Subaru Monitor With 8 Pin ConnectorThis 8 pin camera adapter cable allows you to add an aftermarket rear view camera to OEM monitors on various Subaru models from 2008-2015The additionally installed rear view camera can be powered from the rear light power line (Constant ..

ISO adapter harness for Abarth, Alfa Romeo, Citroen, Fiat, Peugeot and Vauxhall cars with the new style connector. Use to install an after market head unit.New style connector to standard ISO connectors.Harness AdaptorsConnect the head unit to the original radio connector without the nee..

CANbus steering wheel control and parking sensor retention interface for cars with quadlock connectors behind the radio.This interface uses quadlock connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also pro..

Car Audio Steering wheel interface and ISO cables allowing use of the vehicles original steering wheel buttons with a new aftermarket head-unit.This interface also provides power and speaker connections from the car.Suitable Renault based cars and vans without separate display with either &q..

Adaptor cable to convert Fiat Chrysler Automobiles vehicles with the 2014 onwards larger radio connection to a standard ISO connector for fitting an aftermarket head unit.The harness has a built in CANbus interface that provides a key present ignition power supply to the radio, installation is p..

Interface to retain the audio steering wheel controls (including phone button) in a Volkswagen car and also retain parking sensor and climate control display which is normally displayed on the CDR510 radio. The PDC and climate info is shown on the cars central display between the clocks, DOES NOT PU..

Special rear camera for Peugeot Expert, Citroen Dispatch and Toyota ProAce vehicles from 2016 onward. Replaces the rear high level brake light.12v power Colour CMOS image, NTSC. 150° View Angle IP68 Waterproof Includes power cable and 10 meter video cableAn additional inte..

5 metre car audio speaker ISO extension cable. Consists of a 8 way brown female connector and a 8 way brown male connector.This cable is used for extending the speaker iso cable on a handsfree SOT lead or on a car audio head-unit. If it is used for extending a SOT lead to the rear of a car, you ..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. Fasc..

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.To maintain DSP (trip computer control) use item 29-656-ALP (Alpine only)What's Included29-656 Steering Control Adaptor Stereo Patch LeadWorks with the following brands..

Replacement panel to relocate the heated seat and stop/start switches to replace the ash tray. Usually used when fitting an after market Double Din radio.Fits BMW 3-Series E90 (2006-2011) including E91 Touring, E92 Coupe and E93 ConvertibleFor use in conjunction with our double DIN radio fas..

This adapter allows you  to retain the use of the original reverse camera when fitting an aftermarket head unit.This harness can also be used to add an aftermarket camera to the original head unit.the Original camera  needs a 6V feed and not a 12V so this must be used with item 10-671 ..

Complete stereo upgrade kit to install a Single DIN aftermarket radio and retain the use of the steering wheel controls in Citroen Nemo, Peugeot Bipper or Fiat Fiorino vans.Package IncludesSingle Din Fascia (DARK GREY) CANBus Steering Wheel Control Interface ISO Connections ISO to Din..