Package Inlcudes

• Focal EC 165K ELITE K2 Power 6.5" 2-Way Coaxial Car Speakers
• Stinger RKXSK Expert Sound Proofing Deadening Material 2 Sheet Speaker Kit

6½" TWO-WAY COAXIAL COMPONENT KIT

The EC 165 K kit is composed of two 165 mm (6½") woofers with coaxial tweeters.

Like all speaker drivers in the K2 Power line, the coaxial woofers of the EC 165 K kit are also equipped with Kevlar® cones. These cones are endowed with all the ideal qualities: lightness, rigidity and excellent damping, to deliver dynamic sound and perfect definition. The cones are fixed to the frame using TMD suspension, whose exclusive design removes unwanted resonances and reduces the effects of distortion.

The two TKM inverted dome tweeters are composed of aramid fibres. Their exclusive “M”-shaped profile is designed to control deformation of the dome, and to reproduce with precision smoothly high frequencies up to 22 kHz. The frames have been redesigned to make them more robust and shorter; their depth has been reduced as much as possible: 74 mm (3"). These tweeters are equipped with built-in crossovers.

The kit is supplied with aluminium and mesh grilles.

Exceptional Sound For Your Vehicle

The speaker drivers used for the K2 Power have been completely redesigned.
Each component is the result of extensive research in acoustics to push back the limits of performance, of power and of precision!

Kevlar Cone Precision and dynamics

The K2 Power Kevlar® cone, a product of unique expertise Made In Focal, is to this day second to none. Composed of an ultra-light foam structure sandwiched between a thin layer of Kevlar® aramid fibres, and a layer of glass fibres, the K2 Power cone combines three key factors of quality acoustics: Rigidity / Lightness / Damping, for precise and dynamic sound.

NEW “M”-Shaped Tweeter For a precise and smooth high end

The new K2 Power TKMX tweeter features an exclusive “M”-shaped structure. This new-generation aramid-fibre inverted dome tweeter provides great precision in the very high end, and its combination with a “push-pull” motor with IAL2 technology extends the low end of the frequency response and provides extraordinary harmonic balance.

TMD Suspension Say goodbye to distortion

Initially developed for Sopra high-fidelity loudspeakers, TMD suspension (Tuned Mass Damper) features a special structure designed to control unwanted resonance and drastically reduce the harmonic distortion caused by the stress the cone is subject to. This patented technology endows the speaker driver with a very realistic mid-range with great definition.

Radial VC cooling for higher SPL

The new Radial VC cooling system for speaker driver voice coils expels hot air from the voice coil towards the bottom of the magnet through 6 holes. This improves control over the voice coil temperature, limiting the effects of thermal compression and improving reliability. This significantly increases the efficiency of the speaker driver. It also improves dynamics and produces a more powerful sound.

Progressive spider profile Improved linearity and precision

The progressive spider profile of K2 Power speaker drivers is designed to provide a full-bodied sound at low levels and to increase linearity, precision and dynamic range.

An optimised crossover for improved reliability

The components used for the new K2 Power crossovers were selected specifically and optimised in order to improve control over the effects of heat dissipation. These components, which are fundamental to managing the various channels and for the soundstage, are now even more reliable.

Specifications

• Diameter 6-1/2" (165mm)
• Voice coil diameter 1" (25mm)
• Voice coil height 0-9/16?(15mm)
• Motor Magnet
• Tweeter TKM (“M” profile aramid fiber inverted dome)
• Cone Composite K2 Power “W” sandwich cone
• Surround Tuned Mass Damper (TMD)
• Max power 160W
• Nominal power 80W RMS
• Sensitivity (2.83V/1m) 93dB
• Frequency response 60Hz-22kHz
• Impedance 4 Ohms
• Impedance Supplied grilles

Stinger RKXSK Expert Sound Proofing Deadening Material 2 Sheet Speaker Kit

• Expert level sound dampening
• Aluminum outer layer
• Self adhesive
• Easy installation
• Use on all metal panels, doors, roof, floor, firewall & trunk
• Kills panel resonance, squeaks and rattles
• Highest damping vs. weight ratio of any material available
• Improves overall audio frequency response and bass output
• Speaker kit

Expert RoadKill Published Specifications

• Minimum Thickness 0.080in
• Minimum Weight 0.65bs/ft2
• Aluminum Layer- 6 mils