Toyota Auris

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

This is for power supply and speakers only. The cable is  to connect Daihatsu, Perodua, Scion, Subaru, Toyota cars  to an after-market European car radio with ISO style connectors.For all Toyota cars with standard audio systems (without amplifiers)For cars with steering..

Toyota - DIN Antenna Adaptor With Phantom Power Supply. *For Aftermarket Radio With DIN Antenna Connector*Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN versions.Features..

Speaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Seco..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

A pair of front or rear door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataLoudspeaker: 165 mm Installation cutout: 148 mm Ring outside: 166 mm Ring heigh..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Fascia panel speciall..

A pair of Speaker adapter cables used to connect after market speakers to the original loom.{ vehicle_compatibility }Please make sure that is the correct Speaker Harness Adaptor for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.This Fitting Kit incl..

This cable adaptor style antenna connection at the back of the cars original radio to a standard aftermarket male DIN antenna connection to allow the fitting of an aftermarket radio upgrade. The connector is rectangular with a round antenna terminal inside.The loose blue wire needs to be connec..

Toyota Antenna Adaptor. For Aftermarket Radio With DIN Antenna ConnectorAerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN versions. Antenna Aerial Adaptor, conv..

Toyota Antenna Adaptor. For Aftermarket Radio With DIN Antenna ConnectorAerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN versions. Antenna Aerial Adaptor, conv..

Toyota Antenna Adaptor. For Aftermarket Radio With DIN Antenna ConnectorAerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN versions. Antenna Aerial Adaptor, conv..

This reverse camera retention interface is designed for select Toyota and Scion vehicles fitted with the factory Toyota Touch system and the original 24 pin camera connection. It allows the factory reverse camera to continue working when the original radio is replaced with an aftermarket car stereo ..

This fascia kit allows the installation of an aftermarket head unit into a non din sized aperture, High quality finish designed to match the vehicle dashboardUniversal Pocket, use's factory bracketsCar Audio Fitting Accessories are sold with limited instructions. Some knowledge of..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..