Audi A4

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Connects2 INFODAPTER allows vehicle information such as Climate Control, Parking Sensors and Heated seats to be displayed on any aftermarket AV head unit. This information would usually be displayed on the original head unit and therefore would not be retained without the use of an INFODAPTER. The i..

This adapter allows an aftermarket head unit to be installed, whilst retaining the factory fitted amplified system.When connected your new stereo may not power up, and this is no fault of the wiring harness purchased. Audi / VW / Skoda / Fiat and other vehicles tend not to have an ignition sw..

Steering wheel control interface and adapter cable for Audi cars with Quadlock connectors and B&O, BOSE or SYMPHONY original systems. Adaptor cable to fit a new radio to the original connectors in the car with a built in interface to retain the use of the original radio steering wheel controls w..

Double Fakra to Male DIN aerial antenna adapter cable (With 12v phantom power)This antenna adapter cable adapts from the original Double Fakra connector in the vehicle to a standard aftermarket radio DIN antenna connection for the fitting of a stereo upgrade.This cable converts the original ..

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

Steering wheel control interface and adapter cable for Audi cars with ISO and mini ISO connectors behind the factory radio. This adapter cable allows the fitting of a new aftermarket radio by adapting the original connectors in the car to ISO and has a built in CANbus interface to retain the use of ..

Package Includes:JBL Stage1 62 (6.5") 2-Way Coaxial Car Speakers 400 Watt Speaker Adaptor (Pair){ vehicle_compatibility }Stage1 62Take your audio experience to the next level with the JBL Stage1 62 coaxial car speakers. These car speakers deliver powerful performance with..

Complete Double Din Radio Replacement Kit by Connects2 CTKAU11, allows the fitment of a Double Din aftermarket headunit to the selected vehicle. The kit includes everything you need to complete the installation including fascia, Infodapter Interface, Antenna Adaptor and patch lead.{ vehicle_comp..

Fakra Antenna Adaptor Kit Converts car specific antenna connector to a universal aftermarket connector,Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN version..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Single din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Car Audio Fitt..

Rear  door  for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.A4 2009 Rear Door  165 mmPlease make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your make, m..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

This CANBUS steering wheel control interface will allow you to retain the use of the steering wheel audio controls.Gives volume, seek, source, and telephone commands to an after market radio.The quadlock adapter has 4x phono pre-out connectors to integrate with the original amplifier in the ..

Complete stereo upgrade fitting kit to install a Single/ Double DIN radio in an Audi A4 (B7) car (with rear amplified audio systems){ vehicle_compatibility }Package IncludesFascia Panel Adaptor ISO Harness Adaptor Cable Antenna Adaptor CAN Ignition InterfaceFascia Adaptor ..

Connects2 INFODAPTER allows vehicle information such as Climate Control, Parking Sensors and Heated seats to be displayed on any aftermarket AV head unit. This information would usually be displayed on the original head unit and therefore would not be retained without the use of an INFODAPTER. The i..

Package Includes2 Pair Of JBL 16cm 6-1/2" 2-Way 225W Coaxial Car Speakers 2 Pair Of Speaker AdaptorStage3 627JBL Stage3 speakers bring patented technologies, world-class engineering and JBL pro sound heritage together to create a powerful line of car audio loudspeakers. Focus..

Twin Fakra to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and ..

Car Audio Stereo Installation kit for installing a new after market headunit into your Audi. This is complete kit including Fascia Trim Panel, Steering Control Interface, ISO to Male Din Aerial Adaptor and keys to remove your old stereo. Package IncludesSingle Din Fascia Panel (Matt ..