Audi A4

This Audi adapter harness is for cars with quadlock connectors at the rear of the original head unit and with fully amplified audio systems, normally Bose branded.The quadlock adapter has 4x phono pre-out connectors to integrate with the original amplifier in the car. This will allow audio from ..

Speaker adapter cables;  used to connect after market speakers to the original loom on multiple Audi and Tesla models.Suitable for replacing Audi Tweeters or Tesla mid-range speakers.May not fit all speakers on all versions of every vehicle. Some vehicles have mi-range speakers or tweet..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

Package IncludesKenwood KFC-S1766 Stage Sound Series 17cm 6.5" 2-Way Coaxial Car Speaker 300 Watts 165mm Speaker AdaptorKey FeaturesStage Sound Series Flush Mount Speaker 2-Way 2-Speaker System 17 cm Polypropylene Woofer Cone Heavy-Duty Woofer Magnet Circuit 25mm..

ISO adapter harness for fitting a new stereo in an Audi A3, A4, A6 or TT with an original BOSE or SYMPHONY amplified audio system with ISO connectors are the back of the head.The harness has a built in CANbus ignition interface for installation. Also provides illumination. Use with item 21-120 f..

URGENT NOTE: PLEASE CONTACT US PRIOR TO PURCHASING THIS ITEM, EMAIL US A PICTURE OF YOUR ORIGINAL STEREO AND CONFIRM THE MAKE, MODEL AND YEAR OF YOUR VEHICLE.Upgrade your Audi A4 (B7) with a modern 9-inch touchscreen multimedia receiver whilst retaining factory steering wheel controls and comp..

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

Rear  door  for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.A4 2009 Rear Door  165 mmPlease make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your make, m..

ISO adapter harness for fitting a new stereo in an Audi A4, A4 Cabriolet or A6 with an original RND-D (Navigation Plus) radio the basic rear amplified audio system.Also suitable for Audi TT built before November 2001.This harness adapts from the original ISO and Mini ISO connectors at the ba..

Connects2 VAG Double Fakra to DIN Antenna Adaptor. Twin FAKRA to DIN Antenna Adaptor With Phantom Power Supply. For Aftermarket Radio With DIN Antenna Connector. Converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when r..

Complete stereo upgrade fitting kit to install a Single/ Double DIN radio in an Audi A4 (B7) car (with rear amplified audio systems){ vehicle_compatibility }Package IncludesFascia Panel Adaptor ISO Harness Adaptor Cable Antenna Adaptor CAN Ignition InterfaceFascia Adaptor ..

Speaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Seco..

Package IncludesPIONEER 6.3/4 inch 17cm 2-Way Coaxial Car Audio Speaker (Sold As Pair) 165mm Speaker AdaptorFor better-sounding drives. Discover the renewed G-seriesThe improved G-series speaker range is specifically developed for premium and powerful audio, with excellent value ..

Complete stereo upgrade fitting kit to install a Single/Double DIN aftermarket radio in Audi A4 (B7) (2005-2008) car models with Steering wheel controls and fully amplified sound systems.{ vehicle_compatibility }Package IncludesSingle and Double Din Flush Mount Fascia Double Din Fit..

Speaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Seco..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.This Fitting Kit Incl..

Car radio fascia adapter panel to allow the fitting of an aftermarket single din car radio upgrade.The fascia allows the fitting of an aftermarket radio into the dashboard by matching the shape, colour and style of the original radio.A single din radio fits into this fascia using the fitting..

A pair of ISO standard speaker adapter cables for various Abarth, Alfa Romeo, Audi, Citroen, Chrysler, Fiat, Holden, Iveco, Jaguar, Lancia, Peugeot, Porsche, Seat, Skoda, Renault, Vauxhall, Volkswagen And Volvo car vehicle models.Use to fit new aftermarket speakers without needing to cut off the..

Complete Double Din Radio Replacement Kit by Connects2 CTKAU11, allows the fitment of a Double Din aftermarket headunit to the selected vehicle. The kit includes everything you need to complete the installation including fascia, Infodapter Interface, Antenna Adaptor and patch lead.{ vehicle_comp..