Audi A4

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Speaker adapter cables;  used to connect after market speakers to the original loom on multiple Audi and Seat modelsFits most Audis built after 2002, the Seat Exeo (2008-2013) and the Seat Leon Mk3 (2013-2019)May not fit all versions of every vehicle. Some amplified and named sound syst..

ISO adapter harness for Audi cars with ISO and mini ISO connectors at the rear of the head unit.The harness has a built in adapter to drop the rear speaker outputs from the new head unit to a low line level signal to work with the original amplifier in the car.Some cars may have an ignition ..

This adapter allows an aftermarket head unit to be installed, whilst retaining the factory fitted amplified system.When connected your new stereo may not power up, and this is no fault of the wiring harness purchased. Audi / VW / Skoda / Fiat and other vehicles tend not to have an ignition sw..

CTLOCBMV2-2CHBMW, VW, Alfa Romeo, Audi, Mercedes, Seat and Skoda (Quadlock) 2 Channel Line Out ConverterWhether you're adding an aftermarket amplifier or DSP, our 2-Channel Line Output Converter ensures optimal performance with minimal installation hassle. With advanced signal processin..

CT27AA08 ISO to Din converts car specific antenna connector to a universal aftermarket connector. Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit and your vehicle has a ISO type aerial lead fitted. Aerial AdaptorAn Aerial ..

Car audio metal cage kit and trim 113mm high. Needed for aftermarket head-units that do not come with cage kits.This kit is designed  as a replacement to the metal cage kit that is usually supplied with your new aftermarket double din head-unit or navigation system.It is used in standar..

Connects2 CTKAU02 Audi Double Din Stereo Replacement Kit allows fitment of a Double DIN aftermarket headunit to the selected vehicle. Audi A4 Installation Kit. Supplied With Double Din Fascia Kit, CAN-Bus Steering Wheel Control Interface (ISO And Quadlock Looms), Antenna Adaptor, Audi Release Keys &..

Car Audio Stereo Installation kit for installing a new after market headunit into your Audi. This is complete kit including Fascia Trim Panel, Wiring Harness, Aerial Adaptor and keys to remove your old stereo.Package IncludesSingle Din Fascia Adaptor (Matt Black) Wiring Harness (IS..

OEM Units With Horizontal Release KeysSTEREO REMOVAL KEYSStereo Removal Keys to remove head unit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent stereo theft. This means that to remove one of these units..

A pair of front door car speaker adapter panels for 200mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your make, mo..

Steering wheel control interface and adapter cable for Audi cars with Quadlock connectors and B&O, BOSE or SYMPHONY original systems. Adaptor cable to fit a new radio to the original connectors in the car with a built in interface to retain the use of the original radio steering wheel controls w..

Complete stereo upgrade fitting kit to install a single DIN radio in an Audi A4 (B6) car (with rear amplified audio systems)Package IncludesFascia Adaptor Panel CAN Ignition Interface Amplified Speaker Adaptor Cable Antenna Adaptor CableFascia AdaptorThis adaptor will conv..

Twin Fakra to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and ..

OEM Units With Horizontal Release KeysSTEREO REMOVAL KEYSStereo Removal Keys to remove head unit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent stereo theft. This means that to remove one of these units..

Connects2 VAG Double Fakra to DIN Antenna Adaptor. Twin FAKRA to DIN Antenna Adaptor With Phantom Power Supply. For Aftermarket Radio With DIN Antenna Connector. Converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when r..

Fakra to Din Antenna Aerial Adaptor, Suitable for Aftermarket Radio With DIN Antenna Connector. Converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head..

Audi Horizontal Slot Radio Removal Keys.Suitable for the removal of all stereos in AUDI CARS - A2, A3, A4, A6, A8 & TTSTEREO REMOVAL KEYSStereo Removal Keys to remove head unit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head u..

ISO adapter harness for fitting a new stereo in an Audi A3, A4, A6 or TT with an original BOSE or SYMPHONY amplified audio system with ISO connectors are the back of the head.The harness has a built in CANbus ignition interface for plug and play installation. Also provides illumination. Use with..