Skoda

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Single din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Car Audio Fitting A..

OEM Units With Horizontal Release KeysSTEREO REMOVAL KEYSStereo Removal Keys to remove head unit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent stereo theft. This means that to remove one of these units..

This lead is designed to interface between the radio and the radio harness. It provides a power and earth supply to the handsfree kit and route the phone audio through the cars front speakers. No vehicle cables need to be cut.That this adapter lead may not be suitable for amplified systems. ..

Twin Fakra - DIN Antenna Adaptor KitAerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN versions. Antenna Aerial Adaptor, converts car specific antenna connector ..

Fakra to ISO Antenna Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN versions..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Single din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Car Audio Fitting A..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.This Fitting Kit incl..

Designed For VW Platforms (Seat, Skoda And VW)Installation Pocket KTX-1DIN for KIT-7VWX300 Installation KitCompatibleiLX-F903D (Requires KIT-7VWX300)..

Antenna adapter cable for cars with ISO connectors that have amplified original antennas.This cable converts the cars existing ISO aerial plug to an aftermarket DIN type used by most car radio manufacturers. It also provides a power feed to give 12v from the car radio to the cars amplified ante..

Replacement car audio fascia to enable you to change the original radio in the car to a single DIN aftermarket version Fits Skoda Fabia Mk2, Roomster with original BEAT radio only COLOUR: MATT BLACKBelow is an example of a BEAT radio for which this fascia replacesCar Audio Fitting Ac..

Speaker adapter cables; used to connect after market tweeters to the original loom on multiple Skoda models built after 2013 with Standard audioMay not fit all speakers on all versions of every vehicle. Will not fit the woofers or mid range speakers. Will not work on cars with Canton Audio (use ..

Skoda Speaker adapter cables. Used connect the aftermarket speakers to the original connectors in the car.Please make sure that is the correct Speaker Harness Adaptor for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to se..

A pair of front or rear door car speaker adapter panels for 200mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataLoudspeaker: 200 mm Installation cutout: 183.5 mm Ring outside: 211.5 mm Ring h..

Retain original Camera on Highline Volkswagen, Seat and Skoda cars with Volkswagen RNS510, RNS315, RCD510, Seat Trinax and Skoda Bolero or Columbus head units.Retains the original highline reverse camera with an aftermarket head unit. Moving guide lines are not retained.This Camera interface..

Double Fakra Aerial adapter cable for European cars that have twin non amplified original antennas.This cable converts the cars existing Twin fakra aerial plug to an aftermarket DIN type used by most car radio manufacturers.For Alpine Radios use item 21-101 to convert the DIN end to ISO. ..

Speaker Adaptor Plugs. Converts OEM Plugs To Standard Aftermarket Speaker Connectors.Please make sure that is the correct Speaker Harness Adaptor for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the shape of ada..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Single/Double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fasc..

Fakra to Din Antenna Adaptor with Phantom Power Supply. This adapter converts car specific antenna connecter to a DIN aftermarket connector. Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Single/Double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Car Audio Fi..

Package Includes165mm Front Door Speaker Adaptor Speaker Adaptor PlugsSpeaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.Speaker Adaptor Plugs. Converts OEM Plugs To Standard Aftermarket Speaker Connector..