ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..
This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..
This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..
Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..
Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN versions. Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.
..
This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..
This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..
Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..
This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..
Steering wheel control interface and adapter cable for Nissan cars with twin 10 and 6 pin connectors and a smaller 16 pin connector at the back of the radio and original Bose audio systems.The interface and radio adapter cable it is used to connect an aftermarket stereo upgrade and retain the us..
Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..
Steering wheel control interface and adapter cable for Nissan cars with twin 10 and 6 pin connectors and a smaller 16 pin connector at the back of the radio.
The interface and radio adapter cable, it is used to connect an aftermarket stereo upgrade and retain the use of the volume, track skip, sour..
ISO to ISO Amplifier Integration Interface4 channel adjustable ISO to ISO amplifier interface.Use to install a new radio in a car that has an original fit amplifier that takes a pre amplified audio feed.This interface converts the high level audio output of a new head unit to a low level..
Nissan radio replacement adapter cable, allows the fitting of an aftermarket car stereo upgrade by adapting the original 10 and 6 pin Nissan connectors to standard aftermarket ISO connectors.This cable includes the power and speaker supply. If the car has steering wheel controls then use item 29..
Grey rectangle female antenna connector to male DIN car aerial antenna adapter cable.This cable adapts from the grey plastic rectangle antenna connector in the car to a standard aftermarket male DIN connector, this is used when fitting a new aftermarket radio.This is a passive antenna adapte..
Connects2 T-Harness SOT Leads are primarily used when installing Parrot Bluetooth Car kits but can also be used to install other bluetooth devices and hands free kits into car. SOT lead is designed to interface between the radio and the radio harness. It provides a power and earth supply to the hand..
Steering wheel control interface and adapter cable for Nissan Cube, Leaf, Micra K12C, Murano II, Note and X-Trail cars with 6 function audio controls on the steering wheel and a 20 pin Nissan connector at the back of the radio. (Does not include the i button)The interface and radio adapter cable..
This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..
Package IncludesPioneer Class D 4 Channel Multi Channel Car Amplifier 400W
Parrot SOT T-Harness Adaptor LeadCompact 4 Channel Power.An amplifier shouldn’t take up too much space, especially in your car. That is why this Class-D amp might just be what you are looking for...
Nissan radio replacement adapter cable, allows the fitting of an aftermarket car stereo upgrade by adapting the original 10 and 6 pin Nissan connectors to standard aftermarket ISO connectors.This cable includes the power and speaker supply and will return the use of the steering wheel controls w..