Dodge

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fascia Note..

Phoenix Gold ZDT-CH1 T-HarnessUpgrade your vehicle’s audio with our T-Harness for Chrysler, Dodge and Jeep vehicles from 2007 and forward. Our plug-and-play solution makes it easy to upgrade your audio by integrating seamlessly with our amplifiers. Built for a hassle-free installation..

CANBUS steering control and Amplifier Turn On interface for Chrysler, Dodge and Jeep vehicles.Switches on the original amplifier, retains the use of the steering wheel controls and give speed pulse and reverse gear CAN outputs.This interface connects to the CANbus wires at the back of the ra..

This complete Double Din Radio Replacement Kit, allows the fitment of an aftermarket headunit to the selected vehicle. The kit includes fascia, steering stalk controls, and aerial connections.Dodge Fitting Kit Includes:Double Din Fascia Adaptor Steering Wheel Interface Aerial Adaptors..

Complete stereo upgrade kit to install a single or double DIN aftermarket radio and retain the use of the steering wheel controls in Chrysler, Dodge and Jeep vehicles from 2005-2008.Package IncludesSingle and Double Din Fascia Adaptor Steering Control And Amplifier Retention Interface ..

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Connects2 CTKCH02 Double Din Radio Replacement Kit allows the fitment of a Double DIN aftermarket headunit to the selected vehicle. The kit includes double din fascia, Steering Wheel Control Interface (With Both New & Old Connector Types).Connects2 CTKCH02 Includes:Double Din Fascia A..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Single din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Car Audio Fitting A..

CAN bus Car Audio Steering wheel interface. with later  connector and will suit most car models with CAN radio's after 2007Includes Retained accessory power ,speed pulse, reverse, handbrake and illumination signals. Also includes Amplifier turn on This model is universal and ca..

This interface will turn on the amplifier for vehicles with J1850 Amplifier turn on signals for Chrysler Voyager (2005-2008) and Dodge Ram (2002-2005)Special interface for Voyager (05-08) and Dodge Ram (02-05) with J1850 data bus amplifier turn on signal.This interface will turn on the ampli..

Amplifier bypass cable for cars made after 2009. Allows you to connect a new after-market car radio directly to the cars speakers.Includes crossovers.For some Chrysler models (08>) with original amplifier...

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

Replacement car audio fascia to enable you to change the original radio in the car to a single DIN aftermarket versionFits various Chrysler, Dodge, Jeep & Lancia vehiclesCOLOUR: MATT BLACKCar Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio ..

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio...

CANbus steering control and Amplifier Turn On interface for Chrysler, Dodge and Jeep vehicles.This interface switches on the original amplifier, retains the use of the steering wheel controls and gives speed pulse, handbrake and reverse gear CAN outputs.The CANbus interface retains the use o..

Cable to connect Chrysler, Dodge, Jeep car  to an after market European car radio with ISO style connectors. (use for cars without OEM amplifiers and without Steering wheel controls) Use 29-630 for cars with steering controls.Fit most Chrysler Jeep and Dodge models between (02-08) with stan..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a single din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Car Audio Fitti..