Dodge Caliber

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

Phoenix Gold ZDT-CH1 T-HarnessUpgrade your vehicle’s audio with our T-Harness for Chrysler, Dodge and Jeep vehicles from 2007 and forward. Our plug-and-play solution makes it easy to upgrade your audio by integrating seamlessly with our amplifiers. Built for a hassle-free installation..

Chrysler, Dodge and Jeep Hands-free ISO cable for newer style radio connectors. This newer connector  has 22 pins with a single larger pin at either end of the housing.This cable fits behind the car radio and is used as a break-out cable to divert the audio from the handsfree kit to the car..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

ZXMPCH1 is a Plug and Play power-up kit made for Chrysler, Dodge and Jeep vehicles. This power up kit consists of a variety of technology designed to improve the overall audio output of a vehicle. The ZXMPCH1 includes a ZXM500.4 Amplifier and ZXMISOT2 ISO-T harness.Utilising the high-level signa..

Complete stereo upgrade kit to install a single or double DIN aftermarket radio and retain the use of the steering wheel controls in Chrysler, Dodge and Jeep vehicles from 2005-2008.Package IncludesSingle and Double Din Fascia Adaptor Steering Control And Amplifier Retention Interface ..

Fakra to DIN Antenna Adaptor. For Aftermarket Radio With DIN Antenna Connector, converts car specific antenna connector to a DIN antenna connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adapto..

The ISO-T Harness SOT lead (SOUND ON TOP) is the perfect accessory when installing an aftermarket amplifier. The ISO-T harness installed between the amplifier and vehicle, taking high-level input signal from the car and passing it through the amplifier and sending it to the speakers. The SOT leads a..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

CANBUS steering control and Amplifier Turn On interface for Chrysler, Dodge and Jeep vehicles.Switches on the original amplifier, retains the use of the steering wheel controls and give speed pulse and reverse gear CAN outputs.This interface connects to the CANbus wires at the back of the ra..

Amplifier bypass cable for cars made after 2009. Allows you to connect a new after-market car radio directly to the cars speakers.Includes crossovers.For some Chrysler models (08>) with original amplifier...

Cable to connect Chrysler, Dodge, Jeep car  to an after market European car radio with ISO style connectors. (use for cars without OEM amplifiers and without Steering wheel controls) Use 29-630 for cars with steering controls.Fit most Chrysler Jeep and Dodge models between (02-08) with stan..

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a single din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Car Audio Fitti..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio...

CANbus steering control and Amplifier Turn On interface for Chrysler, Dodge and Jeep vehicles.This interface switches on the original amplifier, retains the use of the steering wheel controls and gives speed pulse, handbrake and reverse gear CAN outputs.The CANbus interface retains the use o..

Package IncludesPioneer SPH-DA150BT Mechafree 6.8" Capacitive Touchscreen Apple CarPlay / Android Auto Bluetooth Stereo Double Din Fascia Adaptor With Side Brackets Steering Control and Amplifier Turn On Interface Fakra to DIN Antenna Adaptor Stereo Patch Lead{ vehicle_comp..

Package IncludesPioneer SPH-DA160DAB 6.8" Capacitive Touch Screen Bluetooth Apple Car Play DAB DAB Antenna Aerial Double Din Fascia Adaptor With Side Brackets Steering Control and Amplifier Turn On Interface Fakra to DIN Antenna Adaptor Stereo patch lead{ vehicle_compatib..

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

The CT51-CH02 is an amplifier bypass wiring harness for use in a variety of Chrysler, Dodge and Jeep vehicles (for full model list please view Product Applications). This lead allows you to simply wire and install an aftermarket radio into specific vehicles. The lead helps establish a connection to ..