Dodge Caliber

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio...

CANbus steering control and Amplifier Turn On interface for Chrysler, Dodge and Jeep vehicles.This interface switches on the original amplifier, retains the use of the steering wheel controls and gives speed pulse, handbrake and reverse gear CAN outputs.The CANbus interface retains the use o..

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

The CT51-CH02 is an amplifier bypass wiring harness for use in a variety of Chrysler, Dodge and Jeep vehicles (for full model list please view Product Applications). This lead allows you to simply wire and install an aftermarket radio into specific vehicles. The lead helps establish a connection to ..

Fakra to DIN Antenna Adaptor. For Aftermarket Radio With DIN Antenna Connector, converts car specific antenna connector to a DIN antenna connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adapto..

The ISO-T Harness SOT lead (SOUND ON TOP) is the perfect accessory when installing an aftermarket amplifier. The ISO-T harness installed between the amplifier and vehicle, taking high-level input signal from the car and passing it through the amplifier and sending it to the speakers. The SOT leads a..

The CT51-CH03 is an amplifier bypass wiring harness for use in a variety of Chrysler, Dodge and Jeep vehicles (for full model list please view Product Applications). This lead allows you to simply wire and install an aftermarket radio into specific vehicles. The lead helps establish a connection to ..

Speaker Adaptor Leads Cables (Pair)Speaker adapter cables; used to connect after market speakers to the original loom on various Chrysler, Jeep, Mazda and Jaguar models.May not fit all versions of every vehicle. Some amplified and named sound systems such as BOSE, Boston or Infinity have dif..

A pair of front or rear door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if you..

Use this cable to retain an original fitment camera when fitting a new head unit.Ford Chrysler, Dodge, Jeep and RAM cars and trucks with original equipment reverse camera which use a 22 pin plug. Check vehicle before ordering for this plug, cars within these years had multiple original radio opt..

Chrysler, Dodge and Jeep Hands-free ISO cable for newer style radio connectors. This newer connector  has 22 pins with a single larger pin at either end of the housing.This cable fits behind the car radio and is used as a break-out cable to divert the audio from the handsfree kit to the car..