Dodge Nitro

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

Connects2 CTKCH02 Double Din Radio Replacement Kit allows the fitment of a Double DIN aftermarket headunit to the selected vehicle. The kit includes double din fascia, Steering Wheel Control Interface (With Both New & Old Connector Types).Connects2 CTKCH02 Includes:Double Din Fascia A..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fascia Note..

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in Chrysler, Dodge and Jeep vehicles from 2008 onwards.Package IncludesDouble Din Fascia Adaptor With Side Brackets Steering Control and Amplifier Turn On Interface ..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Single din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Car Audio Fitting A..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Single din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Car Audio Fitting A..

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

The CT51-CH03 is an amplifier bypass wiring harness for use in a variety of Chrysler, Dodge and Jeep vehicles (for full model list please view Product Applications). This lead allows you to simply wire and install an aftermarket radio into specific vehicles. The lead helps establish a connection to ..

Replacement car audio fascia to enable you to change the original radio in the car to a single DIN aftermarket versionFits various Chrysler, Dodge, Jeep & Lancia vehiclesCOLOUR: MATT BLACKCar Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio ..

A pair of front or rear door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if you..

CANbus steering control and Amplifier Turn On interface for Chrysler, Dodge and Jeep vehicles.This interface switches on the original amplifier, retains the use of the steering wheel controls and gives speed pulse, handbrake and reverse gear CAN outputs.The CANbus interface retains the use o..

Use this cable to retain an original fitment camera when fitting a new head unit.Ford Chrysler, Dodge, Jeep and RAM cars and trucks with original equipment reverse camera which use a 22 pin plug. Check vehicle before ordering for this plug, cars within these years had multiple original radio opt..

Amplifier bypass cable for cars made after 2009. Allows you to connect a new after-market car radio directly to the cars speakers.Includes crossovers.For some Chrysler models (08>) with original amplifier...

Cable to connect Chrysler Jeep & Dodge cars made after 2007 with new style radio connector to after-market European car radios with ISO style connectors.Fits  models (07>) with standard audio and without amplifier. These cars are all CAN bus cars and have no 12V ignition feed at the..

Package IncludesPioneer SPH-DA160DAB 6.8" Capacitive Touch Screen Bluetooth Apple Car Play DAB DAB Antenna Aerial Double Din Fascia Adaptor With Side Brackets Steering Control and Amplifier Turn On Interface Fakra to DIN Antenna Adaptor Stereo patch lead{ vehicle_compatib..