Brand: InCarTec
Model: 40-0173-165
A pair of front or rear door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if you..
£34.99
Ex Tax:£34.99
Brand: InCarTec
Model: 27-268
Use this cable to retain an original fitment camera when fitting a new head unit.Ford Chrysler, Dodge, Jeep and RAM cars and trucks with original equipment reverse camera which use a 22 pin plug. Check vehicle before ordering for this plug, cars within these years had multiple original radio opt..
£24.99
Ex Tax:£24.99
Brand: InCarTec
Model: 20-169
Cable to connect Chrysler Jeep & Dodge cars made after 2007 with new style radio connector to after-market European car radios with ISO style connectors.Fits models (07>) with standard audio and without amplifier.
These cars are all CAN bus cars and have no 12V ignition feed at the..
£19.99
Ex Tax:£19.99
Brand: Connects2
Model: CT51-CH0C
This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..
£49.99
Ex Tax:£49.99
Brand: Connects2
Model: CTSCH00C
Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..
£79.99
Ex Tax:£79.99
Brand: Connects2
Model: CT51-CH03
The CT51-CH03 is an amplifier bypass wiring harness for use in a variety of Chrysler, Dodge and Jeep vehicles (for full model list please view Product Applications). This lead allows you to simply wire and install an aftermarket radio into specific vehicles. The lead helps establish a connection to ..
£99.99
Ex Tax:£99.99
Brand: Connects2
Model: CT24CH07
These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fascia Note..
£19.99
Ex Tax:£19.99
Brand: InCarTec
Model: 23-233
Jeep, Chrysler & Dodge CAN bus Car Audio Steering wheel interface.
with later connector and will suit most car models with CAN radio's after 2007Includes Retained accessory power ,speed pulse, reverse, handbrake and illumination signals. Also includes Amplifier turn on ..
£149.99
Ex Tax:£149.99








