Dodge Avenger

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

Phoenix Gold ZDT-CH1 T-HarnessUpgrade your vehicle’s audio with our T-Harness for Chrysler, Dodge and Jeep vehicles from 2007 and forward. Our plug-and-play solution makes it easy to upgrade your audio by integrating seamlessly with our amplifiers. Built for a hassle-free installation..

Chrysler, Dodge and Jeep Hands-free ISO cable for newer style radio connectors. This newer connector  has 22 pins with a single larger pin at either end of the housing.This cable fits behind the car radio and is used as a break-out cable to divert the audio from the handsfree kit to the car..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

ZXMPCH1 is a Plug and Play power-up kit made for Chrysler, Dodge and Jeep vehicles. This power up kit consists of a variety of technology designed to improve the overall audio output of a vehicle. The ZXMPCH1 includes a ZXM500.4 Amplifier and ZXMISOT2 ISO-T harness.Utilising the high-level signa..

Fakra to DIN Antenna Adaptor. For Aftermarket Radio With DIN Antenna Connector, converts car specific antenna connector to a DIN antenna connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adapto..

The ISO-T Harness SOT lead (SOUND ON TOP) is the perfect accessory when installing an aftermarket amplifier. The ISO-T harness installed between the amplifier and vehicle, taking high-level input signal from the car and passing it through the amplifier and sending it to the speakers. The SOT leads a..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Connects2 CTKCH02 Double Din Radio Replacement Kit allows the fitment of a Double DIN aftermarket headunit to the selected vehicle. The kit includes double din fascia, Steering Wheel Control Interface (With Both New & Old Connector Types).Connects2 CTKCH02 Includes:Double Din Fascia A..

Amplifier bypass cable for cars made after 2009. Allows you to connect a new after-market car radio directly to the cars speakers.Includes crossovers.For some Chrysler models (08>) with original amplifier...

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Reversing Camera Retention LeadThe CAM-CH-RT is a reversing camera retention lead specially designed for use on various Chrysler, Dodge and Jeep vehicles (See Vehicle applications for more details). This easy to install plug and play system allows users to retain the use of the factory installed..

Replacement car audio fascia to enable you to change the original radio in the car to a single DIN aftermarket versionFits various Chrysler, Dodge, Jeep & Lancia vehiclesCOLOUR: MATT BLACKCar Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio ..

Speaker Adaptor Leads Cables (Pair)Speaker adapter cables; used to connect after market speakers to the original loom on various Chrysler, Jeep, Mazda and Jaguar models.May not fit all versions of every vehicle. Some amplified and named sound systems such as BOSE, Boston or Infinity have dif..