Volkswagen T-Roc

Use to convert the original (Fakra DAB) antenna connector in a car to a female SMB (used on aftermarket head-units){ vehicle_compatibility }Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modi..

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

A pair of ISO standard speaker adapter cables for VW Group (Cupra, MAN, Seat, Skoda, Volkswagen) vehicles Use to fit new aftermarket speakers without needing to cut off the original speaker connectors.Please make sure that is the correct Speaker Harness Adaptor for your car by firstly checkin..

These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Suitable for fitting 165mm aftermarket speakers to the front doors on select Volkswagen group (2002 Onwards) vehicles.Also fits Touran rear doorsDepth/ Thickness: 25mmPlease..

CTLOCVAG2-2CH MIB/PQ (52 pin Quad lock) 2 Channel Line Out ConverterWhether you're adding an aftermarket amplifier or DSP, our 2 Channel Line Output Converter ensures optimal performance with minimal installation hassle. With advanced signal processing and high-level inputs the 2 Channe..

CTLOCVAG2-4CH MIB/PQ (52 pin Quad lock) 4 Channel Line Out ConverterWhether you're adding an aftermarket amplifier or DSP, our 4-Channel Line Output Converter ensures optimal performance with minimal installation hassle. With advanced signal processing and high-level inputs the 4 Channe..

Package IncludesPioneer Class D 4 Channel Multi Channel Car Amplifier 400W InCarTec ISO T harness SOT Lead{ vehicle_compatibility }Compact 4 Channel Power.An amplifier shouldn’t take up too much space, especially in your car. That is why this Class-D amp might just be wh..

Focal Inside VW Y-ISO HarnessT-harness adapter for an Impulse amplifier — fits Volkswagen vehicles without factory amp{ vehicle_compatibility }Inside Upgrade HarnessFocal's Inside system upgrades include new aftermarket vehicle-specific speakers and subs, along with their I..

ISO T harness for new Volkswagen Golf Mk7, Transporter T6, Audi A1 with full pass though of all cables on newer style Quadlock connector. Flying ignition for connection to 12v Ignition if not using a CAN ignition device.This cable fits behind the radio and routes the phone audio through..

Package IncludesFocal Inside Impulse 4.320 Compact 4 Channel Car Amplifier 400 watts Focal Inside IW-VW-YISO Adaptation Extension ISO Cable Harness{ vehicle_compatibility }Compact 4-Channel Digital AmplifierGive your head unit a breath of fresh air. Head unit am..

Pioneer CD-SVW-UAR.006AE Integration Module for VAG carsInterface to the Pioneer station with a UART connector allowing you to obtain control from the steering wheel and transfer some information from the car to a non-factory radio (air conditioning, parking sensors). It also allows you to conne..

CAN to UART interface for VW platforms (MIB / MIB2 - Seat, Skoda and VW)The APF-X320MIB is the latest generation of Alpine interfaces for Volkswagen platform vehicles (including Skoda and Seat) to connect an Alpine navigation or Digital Media Station seamlessly to your vehicle’s electronic..

Fakra to Din Antenna Aerial Adaptor, Suitable for Aftermarket Radio With DIN Antenna Connector. Converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionFits VW Polo and VW T6.1 models with a maximum installation depth of 150mmThis kit is supplied with side fixing brackets to mount the new radio for a flush fit, so no cage is..

Double Fakra to Male DIN aerial antenna adapter cable (With 12v phantom power)This antenna adapter cable adapts from the original Double Fakra connector in the vehicle to a standard aftermarket radio DIN antenna connection for the fitting of a stereo upgrade.This cable converts the original ..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

This camera  cable  is used in conjunction with a new Quadlock cable and allows you to retain the use of the original reverse camera when fitting an aftermarket head unit. Suitable for Volkswagen Transporter T6 vans/vehicles and Car with the MIB 2  system.The cable connects into t..

Twin Fakra to DIN & ISO adapters have both Male DIN and ISO connections eliminating the need to stock both DIN and ISO products, this is a must for every installer. Converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed..

Radio Removal Keys for VW Vertical Release Slots KeysSTEREO REMOVAL KEYSStereo Removal Keys to remove head unit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent stereo theft. This means that to remove one..