Skoda Superb

Steering wheel control interface and adapter cable for Volkswagen, Seat and Skoda cars to fit an aftermarket radio upgrade.The cable adapts from the Quadlock connector in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable. ..

Complete stereo upgrade kit to install a double din aftermarket radio in a 2008 - 2015 Skoda Superb with original Swing or Bolero radios and retain the use of the original steering wheel audio control buttons.This fitting kit comes with two separate fascias, the first (left main image) mounts th..

Replacement car audio facia to enable you to change the original radio in the car to a Double DIN aftermarket version This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. Desig..

Speaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.Factory fitted speakers often have a shape that does not conform to the DIN standard. Our Speaker adapter panels are designed to line up with the original mounting hole..

ISO adapter harness for Volkswagen, Vauxhall, Holden, Seat, Skoda group vehicles with quadlock connectors at the back of the radio.This adapter harness is designed to adapt from the original quadlock style connector in the dashboard to a standard aftermarket ISO connector to allow the fitting of..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. There is an Aerial Adaptor also included with the Wiring Adap..

Designed For VW Platforms (Seat, Skoda And VW)Installation Pocket KTX-1DIN for KIT-7VWX300 Installation KitCompatibleiLX-F903D (Requires KIT-7VWX300)..

CAN to UART Interface for VW platforms (MIB-PQ - Seat, Skoda and VW)The APF-X303VW is the latest generation of Alpine interfaces for Volkswagen platform vehicles (including Skoda and Seat) to connect an Alpine navigation or Digital Media Station seamlessly to your vehicle’s electronics / C..

Package Includes:VW Fascia Panel Adaptor VW Wiring Harness Adaptor LeadNote: To use as a double din fascia the middle bar needs to be cut.For Polo the dashboard should look like thisPlease Note: You will need to connect the red wire to the ignition supply i..

FLUSH FIT Car radio fascia adaptor panel to allow the fitting of an aftermarket single or double din car radio upgrade.The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.Use the supplied pocket with t..

This lead is designed to interface between the radio and the radio harness. It provides a power and earth supply to the handsfree kit and route the phone audio through the cars front speakers. No vehicle cables need to be cut.That this adapter lead may not be suitable for amplified systems. ..

A pair of ISO standard speaker adapter cables for VW Group (Cupra, MAN, Seat, Skoda, Volkswagen) vehicles Use to fit new aftermarket speakers without needing to cut off the original speaker connectors.Please make sure that is the correct Speaker Harness Adaptor for your car by firstly checkin..

A pair of ISO standard speaker adapter cables for various Abarth, Alfa Romeo, Audi, Citroen, Chrysler, Fiat, Holden, Iveco, Jaguar, Lancia, Peugeot, Porsche, Seat, Skoda, Renault, Vauxhall, Volkswagen And Volvo car vehicle models.Use to fit new aftermarket speakers without needing to cut off the..

Audi / VW / Seat / Skoda & Porsche Quadlock cable to be used in conjunction with an ISO Mute harness normally supplied with the hands-free car kit.This cable has a flying lead for connection to an ignition supply. For a plug and play solution with CAN ignition use item 10-536-IGNThis cab..

Twin Fakra to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and ..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Single din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Car Audio Fitting A..

Interface to retain the audio steering wheel controls (including phone button) in a Volkswagen car and also retain parking sensor and climate control display which is normally displayed on the CDR510 radio. The PDC and climate info is shown on the cars central display between the clocks, DOES NOT PU..

Antenna adapter cable for cars with ISO connectors that have amplified original antennas.This cable converts the cars existing ISO aerial plug to an aftermarket DIN type used by most car radio manufacturers. It also provides a power feed to give 12v from the car radio to the cars amplified ante..

FLUSH FIT Car radio fascia adaptor panel to allow the fitting of an aftermarket single or double din car radio upgrade.The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.This FLUSH FIT fascia makes it..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Single/Double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fasc..