Skoda Superb

This lead is designed to interface between the radio and the radio harness. It provides a power and earth supply to the handsfree kit and route the phone audio through the cars front speakers. No vehicle cables need to be cut.That this adapter lead may not be suitable for amplified systems. ..

Package IncludedFocal ACX 165 6.5" (16.5cm) 2 Way Coaxial Car Speaker Kit (Sold as Pair) 165mm Speaker Adaptor Rings Speaker Adaptor Plugs Stinger RKXSK Expert Sound Proofing Deadening Material 2 Sheet Speaker Kit6 1/2” (16,5CM) 2-WAY Coaxial KitThe 2-way coaxi..

Volkswagen, Seat and Skoda car radio fascia adapter panel to allow the fitting of an aftermarket Double DIN stereo upgrade.The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.The fascia adapter panel t..

This complete Single Din Radio Replacement Kit by Connects2 CTKVW01-ISO, allows the fitment of a Single DIN aftermarket headunit to the selected vehicle. The kit includes everything you need to complete the installation including fascia, ISO wiring harness and aerial connections.Connects2 CTKVW0..

Package Includes165mm Front Door Speaker Adaptor Speaker Adaptor PlugsSpeaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.Speaker Adaptor Plugs. Converts OEM Plugs To Standard Aftermarket Speaker Connector..

FLUSH FIT Car radio fascia adaptor panel to allow the fitting of an aftermarket single or double din car radio upgrade.The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.Use the supplied pocket with t..

Speaker adapter cables; used to connect after market tweeters to the original loom on various Volkswagen, Skoda and Seat models.Fits models built after 1996. Suitable for both front and rear tweeters. Pack contains a pair of cables (enough for two doors for example)May not fit all versions o..

Double Fakra Aerial adapter cable for European cars that have twin non amplified original antennas.This cable converts the cars existing Twin fakra aerial plug to an aftermarket DIN type used by most car radio manufacturers.For Alpine Radios use item 21-101 to convert the DIN end to ISO. ..

Speaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Seco..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Car Audio Fitting Accessor..

CAN to UART interface for VW platforms (MIB / MIB2 - Seat, Skoda and VW)The APF-X320MIB is the latest generation of Alpine interfaces for Volkswagen platform vehicles (including Skoda and Seat) to connect an Alpine navigation or Digital Media Station seamlessly to your vehicle’s electronic..

Package Includes:VW Fascia Panel Adaptor VW Wiring Harness Adaptor LeadNote: To use as a double din fascia the middle bar needs to be cut.For Polo the dashboard should look like thisPlease Note: You will need to connect the red wire to the ignition supply i..

A pair of ISO standard speaker adapter cables for various Abarth, Alfa Romeo, Audi, Citroen, Chrysler, Fiat, Holden, Iveco, Jaguar, Lancia, Peugeot, Porsche, Seat, Skoda, Renault, Vauxhall, Volkswagen And Volvo car vehicle models.Use to fit new aftermarket speakers without needing to cut off the..

Factory fitted speakers often have a shape that does not conform to the DIN standard. Our Speaker adapter panels are designed to line up with the original mounting holes fit behind the door cards of various VW group vehicles to allow you to change to new improved quality 165mm aftermarket speakers q..

ISO adapter harness for Volkswagen, Vauxhall, Holden, Seat, Skoda group vehicles with quadlock connectors at the back of the radio.This adapter harness is designed to adapt from the original quadlock style connector in the dashboard to a standard aftermarket ISO connector to allow the fitting of..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Single/Double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fasc..

Fakra to ISO Antenna Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN versions..

CAN to UART Interface for VW platforms (MIB-PQ - Seat, Skoda and VW)The APF-X303VW is the latest generation of Alpine interfaces for Volkswagen platform vehicles (including Skoda and Seat) to connect an Alpine navigation or Digital Media Station seamlessly to your vehicle’s electronics / C..

APF-V100VWCar manufacturers have started to visualise certain information in the screen of the factory unit. While replacing the original equipment will not limit the functions, drivers will appreciate the ability to retain such visualisations. The APF-V100VW is our first solution that allows th..

Package IncludesInfinity REF-6532EX Reference 165 Watt 6.5" 2 Way Shallow Fit Coaxial Car Speakers 165mm Speaker Adaptor Rings Speaker Adaptor Plugs{ vehicle_compatibility }Accurate, High Performance SoundNew Reference speakers are designed to deliver Infinity’s s..