Renault Megane (2012)

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

This cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector.The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car. A phantom power feed is..

Suitable for the removal of all ISO Radios which have 2 or 1 square or round slots/holes on each side of the stereo.These keys are designed to remove the original unit from the vehicles RENAULTWe try to provide upto date information. If you are unsure about the model number please feel fre..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Package Includes:Pioneer 16.5cm 3-Way Coaxial 320W Car Speakers 165mm Front and Rear Door Speaker AdaptorIt Just Got Easier to Upgrade your Genuine OEM Sound.Upgrade the original sound system of your car. Our A series line up can give you the easy to install sound upgrade solution..

Package IncludedFocal ISRNS165 Renault Custom Fit 6.5" 2 Way Component Speakers Stinger RKXSK Expert Sound Proofing Deadening Material 2 Sheet Speaker KitKey FeaturesSeparate 2-way kit - Renault, Nissan, Dacia, Smart vehicle TNB inverted dome tweeter 2 types of tw..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Package IncludesPioneer TS-A1371F 5 Inch 13cm 3 Way Coaxial Car Speaker System (300W) 130mm Speaker Adaptor Panels Speaker Adaptor CablesNOT SUITABLE FOR MODELS WITH BOSE SPEAKERS{ vehicle_compatibility }It Just Got Easier To Upgrade Your Genuine OEM Sound.Upgrade t..

A pair of ISO standard speaker adapter cables for various Abarth, Alfa Romeo, Audi, Citroen, Chrysler, Fiat, Holden, Iveco, Jaguar, Lancia, Peugeot, Porsche, Seat, Skoda, Renault, Vauxhall, Volkswagen And Volvo car vehicle models.Use to fit new aftermarket speakers without needing to cut off the..

Radio Replacement Kit, allows the fitment of a Single DIN aftermarket headunit to the selected vehicle. This kit includes Fascia, aerial adaptor and Wiring Harness.Package Includes:Single Din Fascia (Dark Grey) Wiring Harness Aerial AdaptorFascia AdaptorThis adaptor will con..

ZDSKR1 Renault 2-Way Speaker KitDSKR1 Plug and Play 2-Way Speaker Kit for Renault (see Vehicle Application for specific models). The ZDSKR1 speakers are designed to fit directly into the same location as the OEM speakers.ZDSKR1 2-Way Speaker Kit for Renault vehicles a 6.5-inch 2-way componen..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

ISO T harness or "Sound on Top" for Renault cars made after 2011 newer style connector.This cable does not include an ignition supply .A separate  ignition feed supply will be needed for your device or use a CAN interface to produce an ignition feed.This cable fits behind the ..

Complete stereo upgrade kit to install a Single DIN aftermarket radio and retain the use of the steering wheel controls in a Renault Megane III (2008-2012), without an original OEM navigation systemPackage IncludesSingle Din Car Radio Fascia CANBus Steering Wheel Audio Control Interface..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

A pair of speaker adapter cables for various Renault car models. Use to fit new aftermarket speakers without needing to cut off the original speaker connectors.NOT SUITABLE FOR MODELS WITH BOSE SPEAKERSPlease make sure that is the correct Speaker Harness Adaptor for your car by firstly..