Renault Kangoo

Use to convert the original (Fakra DAB) antenna connector in a car to a female SMB (used on aftermarket head-units){ vehicle_compatibility }Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modi..

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

This cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector.The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car. A phantom power feed is..

Patch lead for use with 20-XXX-SWC ISO steering wheel control cables to convert from 2 wire learning to 3.5mm jack.Use with self learning programable aftermarket units like Blaupunkt, Grundig or Road Angle. Also for some Kenwood, JVC and Sony units using their "CUSTOM" setting for stee..

Package Includes:JBL Stage1 62 (6.5") 2-Way Coaxial Car Speakers 400 Watt 165mm Speaker Adaptor{ vehicle_compatibility }Stage1 62Take your audio experience to the next level with the JBL Stage1 62 coaxial car speakers. These car speakers deliver powerful performance with ..

This USB retention cable allows the installation of an aftermarket head unit while maintaining the factory USB and AUX connections.,it supports charging and basic media playback. USB-supported Android Auto or Apple CarPlay may be limited or unavailable. Easy plug-and-play installation preserves ..

Handsfree ISO T harness for Renault and  Dacia cars made after 2011 newer style connector. This cable has complete pass through of both connectors behind radio. Includes ignition supply feed.Renault cars that use this lead have a radio that has a display built into the radio itself..

Package IncludedFocal ASE 130 13CM Auditor 2-Way Component Car Speaker Kit (Sold As Pair) 130mm 13cm Speaker Adaptor Stinger RKXSK Expert Sound Proofing Deadening Material 2 Sheet Speaker Kit{ vehicle_compatibility }The 2-way component kit ASE 130 delivers neutral and dynamic so..

A pair of speaker adapter cables for various Renault car models. Use to fit new aftermarket speakers without needing to cut off the original speaker connectors.NOT SUITABLE FOR MODELS WITH BOSE SPEAKERSPlease make sure that is the correct Speaker Harness Adaptor for your car by firstly..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Radio ISO LeadAudio cable for  Dacia cars made after 2012 Converts   harness to female ISO connectors for connecting a after-market European car radio. Use for cars  with the standard audio system without Steering wheel control. Harness AdaptorsConnect the head unit ..

Tailgate Brake Light Reversing CameraHigh level brake light reverse camera single door / tailgate vehicle models. This vehicle-specific rear view camera fits into the third brake light position to provide a clean OEM-style appearance while improving rear visibility when reversing. Ideal for van ..

Barn Door Brake Light Reversing CameraHigh level brake light reverse camera designed for two door / barn door vehicle models. This vehicle-specific rear view camera fits into the third brake light position to provide a clean OEM-style appearance while improving rear visibility when reversing. Id..

Chevrolet, Nissan, Renault, Vauxhall radio replacement adapter cable, allows the fitting of an aftermarket car stereo upgrade by adapting the original 20 pin Nissan connector to standard aftermarket ISO connectors.This cable includes the power and speaker supply. If the car has steering wheel co..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Phoenix Gold ZDT-NSN1 T-HarnessUpgrade your vehicle’s audio with our T-Harness. Our plug-and-play solution makes it easy to upgrade your audio by integrating seamlessly with our amplifiers. Built for a hassle-free installation, with everything you need included, no cutting or splicing..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

ISO T harness or "Sound on Top" for Renault cars made after 2011 newer style connector.This cable does not include an ignition supply .A separate  ignition feed supply will be needed for your device or use a CAN interface to produce an ignition feed.This cable fits behind the ..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..