ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..
This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..
Mazda (2010>) - DIN Antenna Adaptor With Phantom Power Supply. For Aftermarket Radio With DIN Antenna Connector. Converts car specific antenna connector to a universal aftermarket connectorAerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit ..
Mazda car audio interface cable with power and speaker ISO connections allowing use of original steering wheel buttons with a new aftermarket head-unit. Use with Mazda cars made after 2000.Does not allow access to trip display, clock or fader control that is on some newer Mazda cars.Wha..
Speaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Seco..
This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..
Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..
These new adapters have both Male DIN and ISO connections eliminating the need to stock both DIN and ISO products, this is a must for every installer.ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.GT13 to DIN & ISO Antenn..
This adapter allows you to retain the use of the original reverse camera when fitting an aftermarket head unit.This harness can also be used to add an aftermarket camera to the original head unit.the Original camera needs a 6V feed and not a 12V so this must be used with item 10-671 ..
A pair of speaker adapter cables for various Abarth, Fiat, Ford, Mazda and Jaguar vehicle models.
Use to fit new aftermarket speakers without needing to cut off the original speaker connectors.May not fit all versions of every vehicle. Some amplified and named sound systems such as BOSE, or Bow..
This cable converts the cars existing aerial plug to an aftermarket DIN type used by most car radio manufacturers.Honda car radio antenna antenna cable adapter for cars made after 2006 with amplified antenna.
Also fits some later model Holden, Isuzu, Mazda and Suzuki carsAerial Adapto..
Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..
ISO T cable for Ford Ranger & Mazda cars.This cable fits behind the car radio and is used as a break-out cable to enable the audio of the hands-free kit to play through the cars speakers.Use with Parrot CK3000, CK3100, CK3200 LS, MKI9000, MKI9100, MKI9200If using on BOSE cars use the..
Connects2 T-Harness SOT Leads are primarily used when installing Parrot Bluetooth Car kits but can also be used to install other bluetooth devices and hands free kits into car. SOT lead is designed to interface between the radio and the radio harness. It provides a power and earth supply to the hand..
Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..
These adaptors will convert the non din-sized aperture left after removing the factory stereo to a double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fascia Note..
ZDSKN1Introducing the ZDSKN1 2-Way plug and play speaker kit system, specifically engineered for Nissan vehicles (please refer to the Vehicle Application for compatible models). With the ZDSKN1 speakers, elevate your in-car audio experience to new heights. Immerse yourself in exceptional sound q..
A pair of front door car speaker adapter panels for 165mm speakers. These MDF panels allow you replace the cars original speakers with new improved quality aftermarket speakers.An alternative 200mm speaker ring is available here: 40-1893W-200Technical DataLoudspeaker: 165 mm
..
Enables addition of an aftermarket NTSC reversing camera to the original Mazda screen. suitable for various Mazda vehicles from 2006- 2014 that have the 4 pin camera input connector. Some vehicles may require programming to activate the reverse camera function. Contact your Mazda spec..