Mazda CX-5

This adapter allows you  to retain the use of the original reverse camera when fitting an aftermarket head unit.This harness can also be used to add an aftermarket camera to the original head unit.the Original camera  needs a 6V feed and not a 12V so this must be used with item 10-671 ..

Mazda AUX-IN Retention LeadKeeps original  USB and AUX  sockets on Mazda cars from 2012 on. Allows you  to maintain the cars existing AUX socket and use it with a new aftermarket head-unit. This unit uses the cars original housingContains special PCB which replaces the one in..

Mazda (2010>) - DIN Antenna Adaptor With Phantom Power Supply. For Aftermarket Radio With DIN Antenna Connector. Converts car specific antenna connector to a universal aftermarket connectorAerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit ..

ISO T cable for Ford Ranger & Mazda cars.This cable fits behind the car radio and is used as a break-out cable to enable the audio of the hands-free kit to play through the cars speakers.Use with Parrot CK3000, CK3100, CK3200 LS, MKI9000, MKI9100, MKI9200If using on BOSE cars use the..

Connects2 T-Harness SOT Leads are primarily used when installing Parrot Bluetooth Car kits but can also be used to install other bluetooth devices and hands free kits into car. SOT lead is designed to interface between the radio and the radio harness. It provides a power and earth supply to the hand..

USB Retention CableCable to retain the cars original USB port and use it with an aftermarket head-unit..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Enables addition of an aftermarket NTSC reversing camera to the original Mazda screen. suitable for various Mazda vehicles from 2006- 2014  that have the 4 pin camera input connector. Some vehicles may require programming to activate the reverse camera function. Contact your Mazda spec..