Hyundai I30

Use to convert the original (Fakra DAB) antenna connector in a car to a female SMB (used on aftermarket head-units){ vehicle_compatibility }Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modi..

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

Hyundai - DIN Antenna Adaptor. For Aftermarket Radio With DIN Antenna Connector, Converts car specific antenna connector to a universal aftermarket connectorAerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Ante..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Hyundai - DIN Antenna Adaptor. Features Both Antenna Connector Types. For Aftermarket Radio With DIN Antenna Connector, Converts car specific antenna connector to a universal aftermarket connectorAerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head u..

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit. Includes ISO power and speaker wiring to connect the car to the aftermarket head-unitThis interface includes PHONE commands for compatible Bluetooth head-units.Some model Kia and Hyundai c..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.This Fitting Kit incl..

Special Interface for Hyundai and Kia Vehicles to maintain the cars existing AUX sockets but used them with a new aftermarket head-unit. This unit uses the cars original housingKeep the original USB and AUX socket in the car. Hyundai IX20, IX35, I40, Genesis, i10,i20 i30, i40 ..

Phoenix Gold ZDT-HYKI3 T-HarnessUpgrade your vehicle’s audio with our T-Harness. Our plug-and-play solution makes it easy to upgrade your audio by integrating seamlessly with our amplifiers. Built for a hassle-free installation, with everything you need included, no cutting or splicin..

This complete Double Din Radio Replacement Kit by Connects2 CTKHY25, allows the fitment of a Double DIN aftermarket headunit to the selected vehicle. The kit includes everything you need to complete the installation including fascia, steering stalk controls and aerial connections.Connects2 CTKHY..

Patch lead for use with 20-XXX-SWC ISO steering wheel control cables to convert from 2 wire learning to 3.5mm jack.Use with self learning programable aftermarket units like Blaupunkt, Grundig or Road Angle. Also for some Kenwood, JVC and Sony units using their "CUSTOM" setting for stee..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Recoil Level 3-Series RLX65 6.5 inch (165mm) 2-way full-range Coaxial SpeakersBoost your car’s sound with the RecoIL Audio RLX65 Level-3 Series 6.5-inch coaxial speaker system. Featuring a high-strength pressed paper cone, PEI dome tweeter with Neodymium magnet, nitrile rubber surround, an..

Hyundai ISO T-HarnessThe ISO-T Harness SOT lead (SOUND ON TOP) is the perfect accessory when installing an aftermarket amplifier. The ISO-T harness installed between the amplifier and vehicle, taking high-level input signal from the car and passing it through the amplifier and sending it to the ..

Provide a full sound upgrade to your Hyundai i30 (2017 Onwards) front doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit.Elevate your driving experience with our complete 165mm (6.5 inch) speaker upgrade fitting kit, designed specifically for Hyundai i30 models from 2017 onward..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Speaker adapter cables;  used to connect after market speakers to the original loom on multiple Hyundai and Kia models built after 2014May not fit all versions of every vehicle. Some amplified and named sound systems such as BOSE, Infinity or Krell have different speakers with different con..

Hyundai Antenna Adaptor. For Aftermarket Radio With DIN Antenna Connector, Converts car specific antenna connector to a universal aftermarket connectorAerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Ad..

Provide a full sound upgrade to your Hyundai i30 (2017 Onwards) rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit.If you're a proud owner of a Hyundai i30 (2017 onwards) and feel that your car audio system lacks the punch you crave, we have the perfect solution for yo..

Recoil RLM65 Level‑3 6.5″ Component Speaker SystemDrive your sound to the next level with the Recoil RLM65 Level-3 Series 6.5" Component Speaker System. With 80W RMS (160W peak), vibrant yellow pressed-paper cones and nitrile rubber surrounds deliver punchy mid-bass and fast response...