Hyundai I10

Use to convert the original (Fakra DAB) antenna connector in a car to a female SMB (used on aftermarket head-units){ vehicle_compatibility }Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modi..

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

Car audio metal cage kit and trim 103mm high. Needed with some double din fascias that do not fit the normal 113mm cages supplied with aftermarket head-units.This kit is designed to replace the metal cage kit that is usually supplied with your new aftermarket double din head-unit or navigation s..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fascia Note..

Hyundai - DIN Antenna Adaptor. For Aftermarket Radio With DIN Antenna Connector, Converts car specific antenna connector to a universal aftermarket connectorAerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Ante..

Replacement car audio fascia to enable you to change the original radio in the car to a single and double DIN aftermarket versionFits Hyundai i10 1st Gen (PA) (2008-2012) car models, This fascia has side fixing brackets so no radio cage is needed. A removable pocket is included for single DIN in..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Car radio fascia adaptor panel to allow the fitting of an aftermarket Double Din car radio upgrade. The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio. This fascia is supplied with a fitting cage so no addi..

Hyundai - DIN Antenna Adaptor. Features Both Antenna Connector Types. For Aftermarket Radio With DIN Antenna Connector, Converts car specific antenna connector to a universal aftermarket connectorAerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head u..

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in Hyundai I10 (2013-2019) car models. This kit is only suitable for aftermarket head-units with resistive programmable steering controls (KEY1, KEY2 or SWC1, SWC2) and 3.5mm ..

Phoenix Gold ZDT-HYKI2 T-Harness AdaptorUpgrade your vehicle’s audio with our T-Harness adaptor. Our plug-and-play solution makes it easy to upgrade your audio by integrating seamlessly with our amplifiers. Built for a hassle-free installation, with everything you need included, no cu..

Phoenix Gold ZDT-HYKI1 T-Harness AdaptorUpgrade your vehicle’s audio with our T-Harness. Our plug-and-play solution makes it easy to upgrade your audio by integrating seamlessly with our amplifiers. Built for a hassle-free installation, with everything you need included, no cutting or..

Special Interface for Hyundai and Kia Vehicles to maintain the cars existing AUX sockets but used them with a new aftermarket head-unit. This unit uses the cars original housingKeep the original USB and AUX socket in the car. Hyundai IX20, IX35, I40, Genesis, i10,i20 i30, i40 ..

Complete fitting kit to install a Double DIN aftermarket car stereo head unit and retain the use of the original steering wheel controls in Hyundai i10 (2008 - 2013) car models.Package IncludesDouble Din Fascia and Cage Fitting Kit (MATT BLACK) Steering Control Interface Adaptor Aeria..

Package IncludedPhoenix Gold ZDSKN1 6.5″ (165mm) 2-Way Car Speaker Upgrade Kit Stinger RKXSK Expert Sound Proofing Deadening Material 2 Sheet Speaker KitZDSKN1Introducing the ZDSKN1 2-Way plug and play speaker kit system, specifically engineered for Nissan vehicles (please r..

Audio cable for Hyundai cars with USB/AUX retention Converts the factory harness to female ISO connectors for connecting an after-market European car radio. Use for cars with the standard audio system without Steering wheel control. Includes AUX / USB retention for connecting original AUX..

Patch lead for use with 20-XXX-SWC ISO steering wheel control cables to convert from 2 wire learning to 3.5mm jack.Use with self learning programable aftermarket units like Blaupunkt, Grundig or Road Angle. Also for some Kenwood, JVC and Sony units using their "CUSTOM" setting for stee..

Complete fitting kit to change the original radio in a 2013 onward Hyundai I10 (WITHOUT STEERING WHEEL CONTROLS) for a Double DIN after market unit.Package IncludesDouble Din Fascia with Brackets (Matt Black) Hyundai Radio ISO Lead Antenna AdaptorTO RETAIN USE OF THE USB/AUX P..

Phoenix Gold ZDT-HYKI3 T-HarnessUpgrade your vehicle’s audio with our T-Harness. Our plug-and-play solution makes it easy to upgrade your audio by integrating seamlessly with our amplifiers. Built for a hassle-free installation, with everything you need included, no cutting or splicin..

USB Retention CableKeeps original USB socket on Citroen, Kia, Hyundai, Peugeot & Toyota cars. Allows you to maintain the cars existing USB socket and use it with a new aftermarket head-unit. This unit uses the cars original housing. Works on all newer model Citroen / Kia / Hyundai / P..