Hyundai I10

USB Retention CableKeeps original USB socket on Citroen, Kia, Hyundai, Peugeot & Toyota cars. Allows you to maintain the cars existing USB socket and use it with a new aftermarket head-unit. This unit uses the cars original housing. Works on all newer model Citroen / Kia / Hyundai / P..

Audio cable for Hyundai cars with USB/AUX retention Converts the factory harness to female ISO connectors for connecting an after-market European car radio. Use for cars with the standard audio system without Steering wheel control. Includes AUX / USB retention for connecting original AUX..

A pair of front or rear door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataLoudspeaker: 165 mm Installation cutout: 144 mm Ring outside: 202 mm Ring heigh..

Hyundai - DIN Antenna Adaptor. For Aftermarket Radio With DIN Antenna Connector, Converts car specific antenna connector to a universal aftermarket connectorAerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Ante..

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit. Includes ISO power and speaker wiring to connect the car to the aftermarket head-unitThis interface includes PHONE commands for compatible Bluetooth head-units.Some model Kia and Hyundai c..

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in Hyundai I10 (2013-2019) car models. This kit is only suitable for aftermarket head-units with resistive programmable steering controls (KEY1, KEY2 or SWC1, SWC2) and 3.5mm ..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN after market version in a Hyundai I10 (2013 - 2019)This fascia is for right hand drive cars and has 3 mounting points for the original hazard switch and passenger airbag light units.This fascia..

This cable converts the car radios existing aerial plug to an aftermarket DIN type used by most car radio manufacturers.An Aerial Adaptor .is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN version..

Patch lead for use with 20-XXX-SWC ISO steering wheel control cables to convert from 2 wire learning to 3.5mm jack.Use with self learning programable aftermarket units like Blaupunkt, Grundig or Road Angle. Also for some Kenwood, JVC and Sony units using their "CUSTOM" setting for stee..

Replacement car audio fascia to enable you to change the original radio in the car to Single / Double DIN aftermarket version A removable pocket is included with this fasciaFits Hyundai i10 1st Gen (PA) (2008-2012) car modelsCOLOUR: MATT BLACKFor Double DIN installation we have a dedi..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Hyundai - DIN Antenna Adaptor. Features Both Antenna Connector Types. For Aftermarket Radio With DIN Antenna Connector, Converts car specific antenna connector to a universal aftermarket connectorAerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head u..

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.This interface will retain the use of the steering wheel audio controls with an aftermarket head unit as well as the vehicles phone functions.Suitable for various Hyundai/Kia (..

Hyundai ISO T-HarnessThe ISO-T Harness SOT lead (SOUND ON TOP) is the perfect accessory when installing an aftermarket amplifier. The ISO-T harness installed between the amplifier and vehicle, taking high-level input signal from the car and passing it through the amplifier and sending it to the ..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fascia Note..

ISO T cable for some Hyundai, Kia & Ssangyong carsThis cable is used in conjunction with an ISO Mute harness supplied with the hands-free car kit. Use when fitting handsfree car kits.This cable fits behind the car radio and is used as a break-out cable to enable the audio of the hands-fr..

Complete fitting kit to change the original radio in a 2013 onward Hyundai I10 (WITHOUT STEERING WHEEL CONTROLS) for a Double DIN after market unit.Package IncludesDouble Din Fascia with Brackets (Matt Black) Hyundai Radio ISO Lead Antenna AdaptorTO RETAIN USE OF THE USB/AUX P..

Replacement car audio fascia to enable you to change the original radio in the car to a single and double DIN aftermarket versionFits Hyundai i10 1st Gen (PA) (2008-2012) car models, This fascia has side fixing brackets so no radio cage is needed. A removable pocket is included for single DIN in..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio...