Ford Mondeo

Package Included Focal Car Audio ISFORD165 2-way Component Speaker Kit Stinger RKXSK Expert Sound Proofing Deadening Material 2 Sheet Speaker Kit2-WAY COMPONENT KITThe ISFORD165 2-way component kit is designed for all drivers who wish to install a quality sound solution in th..

Package IncludedFocal IC FORD 165 6.5" 120W 2 Way Coaxial Speaker Kit For Ford (Pair) Stinger RKXSK Expert Sound Proofing Deadening Material 2 Sheet Speaker Kit 2-WAY COAXIAL KITThe IC FORD 165 2-way coaxial kit is designed for all drivers who wish to install a quality s..

Use to convert the original (Fakra DAB) antenna connector in a car to a female SMB (used on aftermarket head-units){ vehicle_compatibility }Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modi..

Car audio metal cage kit and trim 103mm high. Needed with some double din fascias that do not fit the normal 113mm cages supplied with aftermarket head-units.This kit is designed to replace the metal cage kit that is usually supplied with your new aftermarket double din head-unit or navigation s..

Complete car radio stereo upgrade fitting kit to allowing you to install a Double DIN aftermarket car stereo head unit and retain the use of the original steering wheel controls in select Ford vehicle models (2002-2014) with square shaped radios.Package IncludesDouble Din Fascia (MATT BLA..

Complete fitting kit to install a double DIN head unit and retain the original steering wheel controls in Ford cars with the original Black oval-shaped radio and CANbus service.This kit includes CAN igntion and illuminations outputs on the steering wheel control interface.Package Includes ..

A pair of front door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataSpeaker: 165mm Panel cut out: 144mm Outer diameter: 164 / 163.8mm Ring height: 21.6mm ..

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

A pair of front or rear door and rear side shelf car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.{ vehicle_compatibility }Technical InformationSpeaker: 165 mm Panel out cut: ..

Upgrade your factory speakers with these 6.5” direct-fit speaker adapter brackets designed. These adapters allow installation of aftermarket speakers into the factory speaker locations while maintaining a secure OEM-style fitment.Fits most 6.5” aftermarket speakers May also fit ..

OEM Units With Horizontal Release KeysSTEREO REMOVAL KEYSStereo Removal Keys to remove head unit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent stereo theft. This means that to remove one of these units..

Fakra to Din Antenna Aerial Adaptor, Suitable for Aftermarket Radio With DIN Antenna Connector. Converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head..

Speaker Adaptor Plugs. Converts OEM Plugs To Standard Aftermarket Speaker Connectors.Please make sure that is the correct Speaker Harness Adaptor for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the shape of ada..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a single din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Car Audio Fitting A..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

A pair of speaker adapter cables for Ford Focus MK1 and Mondeo MK3 vehicle models.Use to fit new aftermarket speakers without needing to cut off the original speaker connectors.{ vehicle_compatibility }Please make sure that is the correct Speaker Harness Adaptor for your car by firstly..

A pair of front or rear door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical InformationSpeaker: 165 mm Panel cut out: 147.5 mm outer diameter: 216.5 mm x 160.5 m..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionThese side bars are made to replace the OEM radio on a range of European Fords built between approximately 1995 and 2005. These are distinguishable by being just slightly smaller..

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN aftermarket version This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.Thi..

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..