Chrysler 300C

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

Fakra to DIN Antenna Adaptor. For Aftermarket Radio With DIN Antenna Connector, converts car specific antenna connector to a DIN antenna connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adapto..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Multikit Fascia adaptors will convert the non din-sized aperture left after removing the factory stereo to a double din/single din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior...

Replacement car audio fascia to enable you to change the original radio in the car to a single and double DIN aftermarket version, comes with a removable pocket for single DIN fittings and side fixing brackets so no double DIN cage is needed.Fits Chrysler, Jeep and Dodge car models with original..

CANbus steering control and Amplifier Turn On interface for Chrysler, Dodge and Jeep vehicles.This interface switches on the original amplifier, retains the use of the steering wheel controls and gives speed pulse, handbrake and reverse gear CAN outputs.The CANbus interface retains the use o..

The CT51-CH02 is an amplifier bypass wiring harness for use in a variety of Chrysler, Dodge and Jeep vehicles (for full model list please view Product Applications). This lead allows you to simply wire and install an aftermarket radio into specific vehicles. The lead helps establish a connection to ..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Replacement car audio fascia to enable you to change the original radio in the car to a single and double DIN aftermarket versionFits Chrysler 300C 1st Gen (2005-2007) car models WITHOUT THE ORIGINAL NAVIGATION SYSTEMCOLOUR: MATT BLACKIf the car has original Navigation use item code 50..

Speaker Adaptor Leads Cables (Pair)Speaker adapter cables; used to connect after market speakers to the original loom on various Chrysler, Jeep, Mazda and Jaguar models.May not fit all versions of every vehicle. Some amplified and named sound systems such as BOSE, Boston or Infinity have dif..

A pair of front or rear door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if you..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

This complete Single Din Radio Replacement Kit, allows the fitment of an aftermarket headunit to the selected vehicle. The kit includes fascia, steering stalk controls, and aerial connections.Chrysler Fitting Kit Includes:Single Din Fascia Adaptor (Black) Steering Wheel Interface Aeri..

Replacement car audio fascia to enable you to change the original radio in the car to a single DIN aftermarket versionFits various Chrysler, Dodge, Jeep & Lancia vehiclesCOLOUR: MATT BLACKCar Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio ..

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio...

Speaker adapter cables used to connect after market speakers to the original loom on multiple Chrysler, Dodge, Jeep and Lancia models.May not fit all versions of every vehicle. Some amplified and named sound systems such as BOSE, Boston or Infinity have different speakers with different connecti..

Cable to connect Chrysler Jeep & Dodge cars made after 2007 with new style radio connector to after-market European car radios with ISO style connectors.Fits  models (07>) with standard audio and without amplifier. These cars are all CAN bus cars and have no 12V ignition feed at the..