Cadillac Escalade

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

GM Cars Single/Double DIN car audio fascia adapter panel to enable you to change the original radio in the car to a double din aftermarket version172mm x 98mmReplaces GM Delco oversize radio.This fascia kit has fixing brackets so no cage kit is needed.An additional pocket is included..

Use this cable to retain an original fitment camera when fitting a new head unit.For General Motors (GM), Chevrolet, Cadillac, and GMC cars and trucks with original equipment navigation and reverse camera which use a 20 pin plug. Check vehicle before ordering for this plug, cars within these yea..

Connects2 INFODAPTER allows vehicle information such as Climate Control, Parking Sensors and Heated seats to be displayed on any aftermarket AV head unit. This information would usually be displayed on the original head unit and therefore would not be retained without the use of an INFODAPTER. The i..

Speaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Seco..

The CAM-GM51 allows you to keep your factory reverse camera function when upgrading a radio with PAC’s plug-n-play OE Reverse Camera Retention Harness.The harness plugs into the factory harness and provides the video from the back-up camera for aftermarket radio installations. Provides pl..