BMW X5

Connects2 CTKBM05 BMW Double Din Radio Replacement Kit, allows the fitment of a Double DIN aftermarket headunit to BMW X5 Installation Kit. Supplied With Double DIN Fascia Trim, I-Bus Steering Wheel Control Interface (17 Pin And 40 Pin Looms) FAKRA Antenna Adaptor & Universal Patch lead.Pack..

Speaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Seco..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

BMW, Land Rover, Mini Quadlock to ISO T cable for cars 2005 onwards without Ignition supply in the radio connector. This cable is used in conjunction with an ISO Mute harness supplied with the hands-free car kit.This cable fits behind the car radio and is used as a break-out cable to enable the ..

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

Complete stereo upgrade fitting kit to install a double DIN aftermarket radio in a BMW X5 E53 car with original sat nav and DSP audio amplifier.Package IncludesDouble Din Fascia Steering Control Interface Antenna Adaptor DSP Amplifier Bypass Cable 5M Antenna Extension Lead Unive..

PDC Parking Sensor Tone and Warning Chime Retention InterfaceCANbus interface to retain the original parking distance control (PDC) tones and other vehicle warning chimes that are lost when replacing the radio in various BMW, Citroen, Peugeot, Volvo and Ford cars.The original parking tones a..

BMW sub-woofer adapter cable allows you to change the woofers underneath BMW front seats. Connects to original harness. { vehicle_compatibility }..

Fakra to DIN Antenna Adaptor. For Aftermarket Radio With DIN Antenna Connector, converts car specific antenna connector to a DIN antenna connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adapto..

Complete fitting kit to install a double DIN head unit and retain the original steering wheel controls in a BMW X5 E53.This kit contains the extension lead needed to connect from the original unit in the rear or the car to the dashboard.Package IncludesDouble Din Fascia Adaptor Steering..

Steering wheel control interface and radio adapter cable for various BMW and Mini cars.The CANbus interface and radio adapter cable, it is used to connect an aftermarket stereo upgrade and retain the use of the volume, track skip, source and phone buttons from the steering wheel with the new rad..

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in BMW X5 (E70) (2007-2013) and X6 (E71) (2008-2014) car models (WITH MOST-AMPLIFIED SYSTEMS)This kit also retains the OEM factory climate controls, as well as providing ..

BMW Quadlock to ISO connectors for connecting a car to an aftermarket car radio. This harness is for cars without Steering wheel controls and for cars that have a12v ignition supply included in the Quadlock connector.For cars with steering wheel controls please use 29-628Harness Adaptor..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Complete fitting kit to install a double DIN head unit and retain the original steering wheel controls in a BMW X5 E53Package IncludesDouble Din Fascia Steering Wheel Control Interface Fakra to DIN Antenna Adaptor Universal patch lead (Included)Fascia AdaptorThis adaptor w..

Adaptor cable to fit an aftermarket stereo upgrade in a BMW X5 E53 car with original sat nav and DSP amplifier and retain the use of the steering wheel controls.This cable adapts from the original connector in the car, known as a quadlock, to standard aftermarket connectors for the new stereo, k..

Quadlock 24 Way Extension Cable24 way micro connector extension cable for Quadlock SOT leadsThis cable is for extending the 24 small micro terminals used in the "quadlock" audio connector in some European cars like BMW, VW, Peugeot and Citroen. Eg. use this cable to convert our st..

Speaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Seco..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

This complete Single Din Radio Replacement Kit, allows the fitment of an aftermarket headunit to the selected vehicle. The kit includes fascia, steering stalk controls, and aerial connections.Fitting Kit Includes:Fascia Panel Adaptor without Pocket Steering Wheel Interface Aerial Adap..