BMW X5

Quadlock 24 Way Extension Cable24 way micro connector extension cable for Quadlock SOT leadsThis cable is for extending the 24 small micro terminals used in the "quadlock" audio connector in some European cars like BMW, VW, Peugeot and Citroen. Eg. use this cable to convert our st..

Speaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Seco..

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in BMW X5 (E70) (2007-2013) and X6 (E71) (2008-2014) car models (WITH MOST-AMPLIFIED SYSTEMS)This kit also retains the OEM factory climate controls, as well as providing ..

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. This interface allows use of cars original steering wheel buttons with a new audio system or navigation unit.Suitable for BMW car models with K Bus data and Quadlock connector.&nb..

Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steering wheel co..

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Adaptor cable to fit an aftermarket stereo upgrade in a BMW X5 E53 car with original sat nav and DSP amplifier and retain the use of the steering wheel controls.This cable adapts from the original connector in the car, known as a quadlock, to standard aftermarket connectors for the new stereo, k..

Rear view camera input interface for BMW X5/X6 with CCC Navi or radio. Allows you to connect a rear-view camera to the CCC factory navigation system.CCC NAVIGATION SYSTEMSThe CCC (Car Communcation Computer) is the first generation of iDrive and was found on many BMW vehicles up to late 2009...

Fakra antenna cable adapter  for cars with non-amplified antenna's and single fakra style connectors. Suits BMW, Jaguar, Chrysler, Chevrolet, MercedesThis  converts the cars existing Fakra aerial plug to an aftermarket DIN type used by most car radio manufacturers. it is for cars..

BMW Quadlock to ISO connectors for connecting a car to an aftermarket car radio. This harness is for cars without Steering wheel controls and for cars that have a12v ignition supply included in the Quadlock connector.For cars with steering wheel controls please use 29-628Harness Adaptor..

URGENT NOTE: PLEASE CONTACT US PRIOR TO PURCHASING THIS ITEM, EMAIL US A PICTURE OF YOUR ORIGINAL STEREO AND CONFIRM THE MAKE, MODEL AND YEAR OF YOUR VEHICLE.Upgrade your BMW X5 E53 with a modern 9-inch touchscreen multimedia receiver whilst retaining factory steering wheel controls and mainta..

Package Includes:Fascia Panel Adaptor (Black) Without Pocket Wiring Harness (40 Pin Quadlock connector) ISO Wiring Harness Adaptor Lead Aerial AdaptorPlease see pic to see what the connection should look like inside the vehiclePlease Note:You will need to connect the re..

Complete fitting kit to install a double DIN head unit and retain the original steering wheel controls in a BMW X5 E53.This kit contains the extension lead needed to connect from the original unit in the rear or the car to the dashboard.Package IncludesDouble Din Fascia Adaptor Steering..

Complete sub amplifier fitting kit to install a monoblock amplifier in a Range Rover L322 or BMW X5 (E53) with original DSP amplifier to retain the subwoofers when changing to an aftermarket radio.This amplifier fitting kit includesBLAM Ultra Compact D Class 4 x 75W Mono Block Amplifier&n..

Car radio fascia adapter panel to allow the fitting of an aftermarket double din car radio upgrade.The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour o the original radio.This fascia kit uses side fixing brackets, the brac..

Steering wheel control interface and radio adapter cable. It is used to connect an aftermarket stereo upgrade and retain the use of the volume, track skip, source and phone buttons from the steering wheel with the new radio.The CANbus interface will also provide ignition, illumination, speed pul..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Package IncludesJVC KW-X850BT Double Din Mechless USB, Bluetooth, AUX, iPod/iPhone Car Stereo Double Din Fascia Trim i-Bus Steering Wheel Control Interface (17 Way round pin and 40 way flat pin looms) Fakra Antenna Adaptor Wiring Harness Stereo Patch Lead{ vehicle_compatibilit..

URGENT NOTE: PLEASE CONTACT US PRIOR TO PURCHASING THIS ITEM, EMAIL US A PICTURE OF YOUR ORIGINAL STEREO AND CONFIRM THE MAKE, MODEL AND YEAR OF YOUR VEHICLE.Upgrade your BMW X5 E53 with a modern 9-inch touchscreen multimedia receiver whilst retaining factory vehicle functionality and maintain..