Volkswagen Taigo

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

Use to convert the original (Fakra DAB) antenna connector in a car to a female SMB (used on aftermarket head-units){ vehicle_compatibility }Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modi..

Radio Removal Keys for VW Vertical Release Slots KeysSTEREO REMOVAL KEYSStereo Removal Keys to remove head unit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent stereo theft. This means that to remove one..

Fakra to Din Antenna Aerial Adaptor, Suitable for Aftermarket Radio With DIN Antenna Connector. Converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head..

CTLOCVAG2-4CH MIB/PQ (52 pin Quad lock) 4 Channel Line Out ConverterWhether you're adding an aftermarket amplifier or DSP, our 4-Channel Line Output Converter ensures optimal performance with minimal installation hassle. With advanced signal processing and high-level inputs the 4 Channe..

CTLOCVAG2-2CH MIB/PQ (52 pin Quad lock) 2 Channel Line Out ConverterWhether you're adding an aftermarket amplifier or DSP, our 2 Channel Line Output Converter ensures optimal performance with minimal installation hassle. With advanced signal processing and high-level inputs the 2 Channe..

Package IncludesFocal Inside Impulse 4.320 Compact 4 Channel Car Amplifier 400 watts Focal Inside IW-VW-YISO Adaptation Extension ISO Cable Harness{ vehicle_compatibility }Compact 4-Channel Digital AmplifierGive your head unit a breath of fresh air. Head unit am..

Pioneer CD-SVW-UAR.006AE Integration Module for VAG carsInterface to the Pioneer station with a UART connector allowing you to obtain control from the steering wheel and transfer some information from the car to a non-factory radio (air conditioning, parking sensors). It also allows you to conne..

Focal Inside VW Y-ISO HarnessT-harness adapter for an Impulse amplifier — fits Volkswagen vehicles without factory amp{ vehicle_compatibility }Inside Upgrade HarnessFocal's Inside system upgrades include new aftermarket vehicle-specific speakers and subs, along with their I..

A pair of ISO standard speaker adapter cables for VW Group (Cupra, MAN, Seat, Skoda, Volkswagen) vehicles Use to fit new aftermarket speakers without needing to cut off the original speaker connectors.Please make sure that is the correct Speaker Harness Adaptor for your car by firstly checkin..

Twin Fakra to DIN & ISO adapters have both Male DIN and ISO connections eliminating the need to stock both DIN and ISO products, this is a must for every installer. Converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed..

Recoil RLM65 Level‑3 6.5″ Component Speaker SystemDrive your sound to the next level with the Recoil RLM65 Level-3 Series 6.5" Component Speaker System. With 80W RMS (160W peak), vibrant yellow pressed-paper cones and nitrile rubber surrounds deliver punchy mid-bass and fast response...

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionFits VW Polo and VW T6.1 models with a maximum installation depth of 150mmThis kit is supplied with side fixing brackets to mount the new radio for a flush fit, so no cage is..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Suitable for fitting 165mm aftermarket speakers to the front doors on select Volkswagen group (2002 Onwards) vehicles.Also fits Touran rear doorsDepth/ Thickness: 25mmPlease..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Volvo Antenna Adaptor. For Aftermarket Radio With DIN Antenna ConnectorAerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN versions. Antenna Aerial Adaptor, conve..