Toyota Land Cruiser

Cable to connect Toyota and Lexus cars  ( after  2005) with TOYOTA/PIONEER  original amplifiers  to to a aftermarket car radio using phono line output from the radio.Check that the connector matches the one on the back of your original radio.( For steering controls use item 2..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

This fascia kit allows the installation of an aftermarket head unit into a non din sized aperture, High quality finish designed to match the vehicle dashboardUniversal Pocket, use's factory bracketsCar Audio Fitting Accessories are sold with limited instructions. Some knowledge of..

Phoenix Gold ZDT-TOY2 T-Harness AdaptorUpgrade your vehicle’s audio with our T-Harness. Our plug-and-play solution makes it easy to upgrade your audio by integrating seamlessly with our amplifiers. Built for a hassle-free installation, with everything you need included, no cutting or ..

Phoenix Gold ZDT-TOY1 T-HarnessUpgrade your vehicle’s audio with our T-Harness. easy to upgrade your audio by integrating seamlessly with our amplifiers. Built for a hassle-free installation, with everything you need included, no cutting or splicing required.SPECIAL ORDER ONLY 2-3 DA..

BLAM Relax 165TOY S 6.5" (165mm) Component Speakers for ToyotaThe BLAM 165TOY S kit is designed for direct installation in Toyota vehicles using original speaker locations and connectors—no modifications needed. Ideal for enhancing mid- and high-frequency performance,The Kit Inclu..

This cable adaptor style antenna connection at the back of the cars original radio to a standard aftermarket male DIN antenna connection to allow the fitting of an aftermarket radio upgrade. The connector is rectangular with a round antenna terminal inside.The loose blue wire needs to be connec..

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit. Use with Toyota carsMust be used with patch lead to suit make of head unit being fitted.What's Included29-648 Steering Control Adaptor Stereo Patch LeadWorks with the fol..

Provide a full sound upgrade to your Toyota front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit. This kit fits various Toyota vehicles including Alphard, Auris, Avensis, Hilux, RAV4 and Lexus RX. Please see our compatibility list for more cars that can benefit from thi..

Package IncludedPhoenix Gold ZDST6CX 6.5” (165mm) 2-Way Coaxial Speakers Stinger RKXSK Expert Sound Proofing Deadening Material 2 Sheet Speaker KitZDST6CXThe ZDST6CX is a high-quality 6.5-inch speaker upgrade kit for a variety of different Toyota models (For specific models ..

Provide a sound upgrade to your Daihatsu, Lexus, Scion, Toyota front or rear doors with our 165mm (6.5 inch) speaker upgrade fitting kit.This kit fits various Toyota vehicles including Alphard, Auris, Avensis, Hilux, RAV4 and Lexus RX. Please see our compatibility list for more cars that can ben..

Allows you to retain the original OEM factory fitted camera when installing a new aftermarket head unit on select Toyota, Scion and Subaru car models (Display and navigation model radios only).{ vehicle_compatibility } If adding an aftermarket camera to the original system please..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Amplifier bypass cable for Toyota Landcruiser 120 with LC5 trim. Allows you to connect a new aftermarket radio directly to the car's speakers after bypassing the original amplifier which is under the front seat.This cable does not power the subwoofer, there are wires present for the subwoof..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Connects2 T-Harness SOT Leads are primarily used when installing Parrot Bluetooth Car kits but can also be used to install other bluetooth devices and hands free kits into the car. SOT lead is designed to interface between the radio and the radio harness. It provides a power and earth supply to the ..

This reverse camera retention interface is designed for select Toyota and Scion vehicles fitted with the factory Toyota Touch system and the original 24 pin camera connection. It allows the factory reverse camera to continue working when the original radio is replaced with an aftermarket car stereo ..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Single din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Car Audio Fitting A..

CAM-TY2-RT Toyota​ Reverse Camera Retention InterfaceThe CAM-TY2-RT is a reversing camera retention lead specially designed for Toyota models (For specific models please view Vehicle Applications). This easy to install product allows users to retain the use of the factory installed camera s..

ZXMPT1 is a power-up kit made for Toyota vehicles from 2000 to 2018 (for a full model list please view Vehicle Applications). The ZXMPT1 power up kit consists of a variety of technology designed to improve the overall audio output of a vehicle. The ZXMPT1 includes a ZXM500.4 Amplifier and ZXMISOT2 I..