Skoda Octavia

Designed For VW Platforms (Seat, Skoda And VW)Installation Pocket KTX-1DIN for KIT-7VWX300 Installation KitCompatibleiLX-F903D (Requires KIT-7VWX300)..

Speaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.{ vehicle_compatibility }Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your make, model and year of car is li..

Steering wheel control interface and adapter cable for Volkswagen, Seat and Skoda cars to fit an aftermarket radio upgrade.The cable adapts from the Quadlock connector in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable. ..

Complete stereo upgrade fitting kit to install a Single DIN aftermarket radio and retain the use of the steering wheel controls in various Skoda Yeti (2009-2014) car models.This kit is suitable for select Skoda Yeti car models with a single Fakra antenna connection on the back of the original ra..

A pair of ISO standard speaker adapter cables for various Abarth, Alfa Romeo, Audi, Citroen, Chrysler, Fiat, Holden, Iveco, Jaguar, Lancia, Peugeot, Porsche, Seat, Skoda, Renault, Vauxhall, Volkswagen And Volvo car vehicle models.Use to fit new aftermarket speakers without needing to cut off the..

Connects2 Fakra to DIN & ISO Antenna Adaptor with Phantom Power Supply, Converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna ..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Single/Double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Car Audio Fi..

Radio Removal Keys for Skoda Vertical Release SlotsSTEREO REMOVAL KEYSStereo Removal Keys to remove head unit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent stereo theft. This means that to remove one o..

APF-V100VWCar manufacturers have started to visualise certain information in the screen of the factory unit. While replacing the original equipment will not limit the functions, drivers will appreciate the ability to retain such visualisations. The APF-V100VW is our first solution that allows th..

FLUSH FIT Car radio fascia adaptor panel to allow the fitting of an aftermarket single or double din car radio upgrade.The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.Use the supplied pocket with t..

These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Suitable for fitting 165mm aftermarket speakers to the front doors on select Skoda vehicles.Depth/ Thickness: 25mmPlease make sure that is the correct Speaker Adaptor for your v..

Retain original Camera on Highline Volkswagen, Seat and Skoda cars with Volkswagen RNS510, RNS315, RCD510, Seat Trinax and Skoda Bolero or Columbus head units.Retains the original highline reverse camera with an aftermarket head unit. Moving guide lines are not retained.This Camera interface..

Handsfree ISO T hraness for VW cars made after 2010 with newer style Quadlock connector also fit for Seat & Skoda Cars.Flying ignition for connection 12v IgnitionThis cable fits behind the radio and routes the phone audio through the front speakers.If the original radio connector &nb..

Connects2 INFODAPTER allows vehicle information such as Climate Control, Parking Sensors and Heated seats to be displayed on any aftermarket AV head unit. This information would usually be displayed on the original head unit and therefore would not be retained without the use of an INFODAPTER. The i..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Single din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Car Audio Fitting A..

Connects2 T-Harness SOT Leads are primarily used when installing Parrot Bluetooth Car kits but can also be used to install other bluetooth devices and hands free kits into the car. SOT lead is designed to interface between the radio and the radio harness. It provides a power and earth supply to the ..

Antenna adapter cable for cars with ISO connectors that have amplified original antennas.This cable converts the cars existing ISO aerial plug to an aftermarket DIN type used by most car radio manufacturers. It also provides a power feed to give 12v from the car radio to the cars amplified ante..

Provide a sound upgrade to your VW, Skoda and Seat front doors with our 165mm (6.5 inch) speaker upgrade fitting kit.This kit fits various VW, Skoda and Seat car models . Please see our compatibility list for more cars that can benefit from this upgrade kit.This fitting kit allows the fitt..

Complete stereo upgrade fitting kit to install a single / double DIN head unit into various Skoda car models.This kit is suitable for Skoda car models with a Single Fakra antenna connection on the back of the original radio Includes a pre-wired CANBus interface to generate a key present..

Camera Retention RGB Interface for RNS510, RNS315 and RCD510Retain original Camera on Volkswagen and Skoda cars with an RGB cameraThis Camera interface cable allows you to retain the original factory fitted camera when fitting an aftermarket head unit on various Volkswagen and Skoda vehicle ..