Skoda Octavia

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Provide a sound upgrade to your VW, Skoda and Seat front doors with our 165mm (6.5 inch) speaker upgrade fitting kit.This kit fits various VW, Skoda and Seat car models . Please see our compatibility list for more cars that can benefit from this upgrade kit.This fitting kit allows the fitt..

Complete stereo upgrade fitting kit to install a single or double DIN aftermarket radio in various Volkswagen cars.Package IncludesFascia with Removable Pocket Radio Replacement Adaptor Cable Antenna adapterFor double din installation the central bar of the fascia needs to be ..

This lead is designed to interface between the radio and the radio harness. It provides a power and earth supply to the handsfree kit and route the phone audio through the cars front speakers. No vehicle cables need to be cut.That this adapter lead may not be suitable for amplified systems. ..

ISO adapter harness for Volkswagen, Vauxhall, Holden, Seat, Skoda group vehicles with quadlock connectors at the back of the radio.This adapter harness is designed to adapt from the original quadlock style connector in the dashboard to a standard aftermarket ISO connector to allow the fitting of..

Speaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Seco..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.This Fitting Kit incl..

CAN to UART interface for VW platforms (MIB / MIB2 - Seat, Skoda and VW)The APF-X320MIB is the latest generation of Alpine interfaces for Volkswagen platform vehicles (including Skoda and Seat) to connect an Alpine navigation or Digital Media Station seamlessly to your vehicle’s electronic..

Package Includes:JL Audio C1-650x 6.5" 16.5cm 2 Way Yellow Cone Car Speakers 165mm Speaker Adaptor Panels Speaker Adaptor Cable Harness Stinger RKXSK Expert Sound Proofing Deadening Material 2 Sheet Speaker Kit{ vehicle_compatibility }C1-650xCoaxial Speaker System: 6...

Enhance your in-car audio with this front door speaker upgrade kit, featuring high-performance Recoil RLX65 165mm (6.5") coaxial speakers. This kit includes vehicle-specific speaker adapters and plug-free wiring leads to replace the original factory speakers. Enjoy better clarity, improved midb..

Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in various Skoda Yeti (2009-2014) car models.This kit is suitable for select Skoda Yeti car models with a single Fakra antenna connection on the back of the original ra..

Replacement car audio facia to enable you to change the original radio in the car to an aftermarket radio, Colour Matt BlackTo fit a double DIN radio, a second fascia such as the 50-714 will need to be purchased and fitted inside, which may require some modification.Important Fascia Notes ..

Twin Fakra to DIN & ISO adapters have both Male DIN and ISO connections eliminating the need to stock both DIN and ISO products, this is a must for every installer. Converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.This Fitting Kit incl..

Provide a full sound upgrade to your Volkswagen or Skoda's front doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit. This kit fits Volkswagen group vehicles including the Golf Mk4, Scirocco and Transporter T6.1 or Seat Leon. Please see our compatibility list for more cars that ..

Speaker adapter cables;  used to connect after market speakers to the original loom on multiple Skoda models built after 2013, including models with Canton soundMay not fit all speakers on all versions of every vehicle. Some vehicles have mi-range speakers or tweeters with different connect..

OEM Units With Horizontal Release KeysSTEREO REMOVAL KEYSStereo Removal Keys to remove head unit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent stereo theft. This means that to remove one of these units..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.{ vehicle_compatibili..

Interface to retain the audio steering wheel controls (including phone button) in a Volkswagen car and also retain parking sensor and climate control display which is normally displayed on the CDR510 radio. The PDC and climate info is shown on the cars central display between the clocks, DOES NOT PU..

Package IncludesJBL 6-1/2"(16.5cm) 2 Way Coaxial Car Speaker (Sold as Pair) 165mm Speaker AdaptorStage3 627JBL Stage3 speakers bring patented technologies, world-class engineering and JBL pro sound heritage together to create a powerful line of car audio loudspeakers. Focusin..