Skoda

Car radio fascia adaptor panel to allow the fitting of an aftermarket single or double DIN car radio upgrade.The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.Use the supplied pocket with the fascia ..

Speaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.Factory fitted speakers often have a shape that does not conform to the DIN standard. Our Speaker adapter panels are designed to line up with the original mounting hole..

Audi / VW / Seat / Skoda & Porsche Quadlock cable to be used in conjunction with an ISO Mute harness normally supplied with the hands-free car kit.This cable has a flying lead for connection to an ignition supply. For a plug and play solution with CAN ignition use item 10-536-IGNThis cab..

Connects2 INFODAPTER allows vehicle information such as Climate Control, Parking Sensors and Heated seats to be displayed on any aftermarket AV head unit. This information would usually be displayed on the original head unit and therefore would not be retained without the use of an INFODAPTER. The i..

OEM Units With Horizontal Release KeysSTEREO REMOVAL KEYSStereo Removal Keys to remove head unit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent stereo theft. This means that to remove one of these units..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.{ vehicle_compatibili..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Car Audio Fitting Accessor..

Radio Removal Keys for Skoda Vertical Release SlotsSTEREO REMOVAL KEYSStereo Removal Keys to remove head unit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent stereo theft. This means that to remove one o..

Car radio fascia adaptor panel to allow the fitting of an aftermarket Double din Car radio upgrade.The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.This fascia kit uses side fixing brackets, the bra..

Replacement car audio fascia to enable you to change the original radio in the car to a single and double DIN aftermarket versionA pocket is provided for Single DIN installation. If using for Double DIN installation then you will need to cut the central bar of the fascia.COLOUR: MATT BLACK ..

Speaker adapter cables used to connect after market tweeters to the original loom on Mini, MG, Rover and Skoda{ vehicle_compatibility }Please make sure that is the correct Speaker Harness Adaptor for your car by firstly checking to see if your make, model and year of car is listed in ..

CAN to UART interface for VW platforms (MIB / MIB2 - Seat, Skoda and VW)The APF-X320MIB is the latest generation of Alpine interfaces for Volkswagen platform vehicles (including Skoda and Seat) to connect an Alpine navigation or Digital Media Station seamlessly to your vehicle’s electronic..

Interface to retain the audio steering wheel controls (including phone button) in a Volkswagen car and also retain parking sensor and climate control display which is normally displayed on the CDR510 radio. The PDC and climate info is shown on the cars central display between the clocks, DOES NOT PU..

Aerial adapter cable for European cars that have the double twin or double  single Fakra connector and amplified original antennas. Maintains cars antenna diversity. Only provides 12v power to the FM antenna not the AM antenna.This cable converts the cars existing fakra aerial plug to an a..

Package IncludesInfinity REF-6532EX Reference 165 Watt 6.5" 2 Way Shallow Fit Coaxial Car Speakers 165mm Speaker Adaptor Rings Speaker Adaptor Plugs{ vehicle_compatibility }Accurate, High Performance SoundNew Reference speakers are designed to deliver Infinity’s s..

Package IncludesKenwood Stage Sound Series 17cm 6.5" 2-Way Coaxial Car Speaker 300 Watts 165mm Front Door Speaker Adaptor Speaker Adaptor PlugsKey FeaturesStage Sound Series Flush Mount Speaker 2-Way 2-Speaker System 17 cm Polypropylene Woofer Cone Heavy-Duty Woo..

Speaker adapter cables; used to connect after market tweeters to the original loom on multiple Skoda models built after 2013 with Standard audioMay not fit all speakers on all versions of every vehicle. Will not fit the woofers or mid range speakers. Will not work on cars with Canton Audio (use ..

Connects2 INFODAPTER allows vehicle information such as Climate Control, Parking Sensors and Heated seats to be displayed on any aftermarket AV head unit. This information would usually be displayed on the original head unit and therefore would not be retained without the use of an INFODAPTER. The i..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Single din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Car Audio Fitting A..